Multi Part Lotus (fusion360)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A lotus flower that can easily be printed in 2 colors without an MMU
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 104
- Wydruki
- 0
- Wyświetlenia
- 273
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to print a smaller version of the lotus but the inner petals were already tedious to print at regular scale. I therefore removed them and then redid the remix of combining the lilly center with the lotus in fusion. I went back to the original lotus file but used the sliced lilly part of the base remix.
The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily. The tolerances will adjust with the scale there, so I recommend using it for a better control on the fit.
Printing information:
- Split the model to its parts before printing each part separately (in the same orientation as how they came)
- Use regular adjusted supports
- Use a brim to improve the bed adhesion of the small part