1 / 6
Tuning parts for MPX EasyGlider (electric)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tuning parts for the EasyGlider (electric) from 2005, for all those who have such an RC airplane and want to renew it.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (10)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (2)Powiązane
ESC Mounting:
- The mount for the electronic speed controller (ESC) is designed specifically for the MULTIcont BL-27/II from Multiplex.
- The small holes in the ESC mount are intended for cable ties (zip ties) up to 2.5 mm wide. These serve as strain relief for the cables.
Cable Ducts:
- The cable ducts are just large enough for the individual pins of the servo connection cables to pass through.
- To do this, you’ll need to carefully remove the connector shell. Use a needle to push out the individual contacts without damaging them.
- Important: Print the cable ducts vertically. If you print them horizontally, the top layers may sag slightly (due to overhangs), and the cables may no longer fit properly.
- The cable ducts are required to guide the servo cables reliably so that they can be used with a fuselage cable feed-through.
Aileron Cover (Mirroring for Opposite Wing):
- To use the aileron cover on the opposite wing, mirror the part in your slicer before printing.
- The aileron servo covers can be mounted to the wing using M2 brass threaded inserts.
Battery Rail:
- The battery rail is attached to the underside of the battery using double-sided tape.
- It serves as a guide to help align and secure the battery in place during installation.