1 / 6
Tuning parts for MPX EasyGlider (electric)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tuning parts for the EasyGlider (electric) from 2005, for all those who have such an RC airplane and want to renew it.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 29
- Makes
- 0
- Views
- 160
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
ESC Mounting:
- The mount for the electronic speed controller (ESC) is designed specifically for the MULTIcont BL-27/II from Multiplex.
- The small holes in the ESC mount are intended for cable ties (zip ties) up to 2.5 mm wide. These serve as strain relief for the cables.
Cable Ducts:
- The cable ducts are just large enough for the individual pins of the servo connection cables to pass through.
- To do this, you’ll need to carefully remove the connector shell. Use a needle to push out the individual contacts without damaging them.
- Important: Print the cable ducts vertically. If you print them horizontally, the top layers may sag slightly (due to overhangs), and the cables may no longer fit properly.
- The cable ducts are required to guide the servo cables reliably so that they can be used with a fuselage cable feed-through.
Aileron Cover (Mirroring for Opposite Wing):
- To use the aileron cover on the opposite wing, mirror the part in your slicer before printing.
- The aileron servo covers can be mounted to the wing using M2 brass threaded inserts.
Battery Rail:
- The battery rail is attached to the underside of the battery using double-sided tape.
- It serves as a guide to help align and secure the battery in place during installation.