54 models
MPX connector frame for installation in a wing for a RC model or other things. There is a short and a long version of the frame. I have printed with 100% infill You can print without support material Category: R/C Vehicles
MPX plug form for hot glue The form can be printed with ABS material or another material with high printing temperature. PTFE material is best suited for milling. The threads are to be made with a thread cutter. 4 screws M4 2-4 dowel pins…
MPX adaptor for wing mounts etc. Print Settings Printer Brand: Formlabs Printer: Formlabs Form 2 Rafts: Yes Supports: Yes Resolution: 0.1 Infill: 100% How I Designed This Fusion 360 Category: Hobby
I designed it all on my own. Hope it help. You will need 2x M3x27 bolts and 2x M3 nuts Rest of bolts are included to gun
Small handstop for standard Sig MPX foreguard (1 MLOK slot). Print it from Polycarbonate, use conical screws and locks for MLOK (available on Aliexpress, eBay, etc.).
mpx hållare som håller kontakten utan behov av lim. klicka bara fast den.
This holder enable to pull easily the MPX female plug from the male plug. Fill with hot glue the female holder. / Manchon pour prise multiplex female permettant un retrait facile de la prise male. Remplir le manchon de colle chaude pour…
As I used the APFG/VFC MPX gbbr as reference, I cannot guarantee compatibility with the other MPX versions. To install, move the retention pin from the stock handguard and screw it into this replica. Then install the handguard like…
New mould for MPX connectors, for male/femelle Category: Toys & Games
PROJET MINI PHEN X Le projet Mini Phen X (MPX) est né de l'inspiration de la célèbre KayouMini et de la JENO POCKET . L'idée derrière la MPX était de créer une version personnelle et originale de ce modèle mythique, tout en conservant son…
A Simple MPX magazine holder. A great way to organize the magazines in your safe. Easily able to remove the mags, and place them back into the holder. Mags can be stored loaded, or unloaded. Works with 10, 20, or 30 Round mags. Gen 1 or…
It will help hold the plug in place while soldering on the wires. When I do my soldering I always keep the male and female together in case things get a bit hot. That way the pins always stay in place and don't shift. The plug just slides…
Holder for MPX and XT-60 connectors Installation in the wings of RC - VQ Twin Otter Category: R/C Vehicles
How do I fit MPX plugs into a narrow RC glider fuselage? MPX (Multiplex) male / female plug holder for RC sailplane, glider For installation in 40mm wide fuselages / aircraft body Bracket has inside a stop for the MPX connector Fix the…
This is case for Waveshare Sony IMX179 8MPx camera which is 38x38mm. For back case use 3mm threaded inserts and use 10-13mm M3 screws. I printed without supports, but inner part is ugly then, so I recommend supports on.
This is a mold for Hot Glue allowing to secure connections of wires/soldering with the plug Print Settings Printer: fabrikator mini 2 Rafts: No Supports: No Resolution: 0.2 Infill: 50% Category: DIY
Enclosure for Neutrik's NAC3MPX (powerCON TRUE1) inlet. Made to protect back of chassis connector from water, dust etc. Simply add a hole for a wire in a slicer and here you go!
This model requires the user to desolder the 90 degree JST connector from the MPX Y end stop PCB and solder in a straight JST connector. If that is above your skill level, this mod may not be for you. You will also need to trim the PCB a…
GoPro Mount for the RC Funcub from Multiplex you can screw with the wings, easy to mount The gopro is behind the cw, check the cw from your funcub before the start. With a hot air blower you can bend wing shape, but it is not necessary,…
Version 3 GoPro Mount for the RC Funcub from Multiplex you can screw with the wings, easy to mount. The center of the GoPro is over the CW (ca. 80mm) A recess for the ttow release available. With a hot air blower you can bend wing shape,…
Printed with 95A TPU. Just scaled/skewed to fit MPX magazine. Should work fine for similar size, such as Scorpion mags.
Case for two connectors for cable between motor and driver.
Petite conception rapide, histoire de tester, de s'amuser, pour faire une MPX en mode Kayoumini. On gratte un peu de poids si on compare au TPU Red Bull. On perd à peu près 10 grammes, ce qui n'est pas négligeable. On retrouve un peu le…
This Speedloader Adapter was made possible through the help of Björn from "Pfitzner Waffen", who was an absolute Lad and provided the magazine. Be a trooper and give him some love! His Store → https://www.pfitzner-waffen.de/ ---Don't you…
This is an adapter to mount a Beacon probe to a MPX 9mm CNC carriage.
Hot glue mold for MPX6 plugs Base body is printed in PLA, and the plug for the hot tip is nylon. Print standing. You can also 3D Print the entire thing in resin. Then there is no need for a "hot-plug" Print Settings Printer Brand:…
Remixed AndyABG's Z umbilical Mount to fit the MPX Y endstop pcb, and removed the lower PG9 umbilical thread so that it can be used as a passthrough for the under gantry mounted z chain Fits a PG7 cable gland, and uses (1) M3x8, (1)…
ESC Mounting: The mount for the electronic speed controller (ESC) is designed specifically for the MULTIcont BL-27/II from Multiplex . The small holes in the ESC mount are intended for cable ties (zip ties) up to 2.5 mm wide . These serve…
A housing for MPX 6 and 8 connectors. It is similar to others but includes a MPX 8 version, as well as having an inner bracket to keep the MPX connector from going too deep into the plug. Glue the connector into the plug with CA, and use…
I made this tray for installing and accessing receiver and flight controller. The tray is fastened with velcro. It sits securely yet can easily be removed. Or just use the bottom plate to mount equipment deep inside yet easy to access by…
MoleBox system - 3D printed boxes compatible with BITBEAM construction kit (therefore even with LEGO Technics/Mindstorms). The main purpose of MoleBox is covering a particular sensor or the entire module and simultaneously allowing…
Easy to use bracket to keep a MPX receiver RX-7/5 securley in place via a snap-in. Additionally a rubber band can be applied keep the snap-in tight.
Loader Adapter for the VFC/APFG MPX magazines
Antenna socket for the Multiplex mc2020 / mc2010 R/C transmitter, to replace the original "telescopic" antenna socket. Just snap into the transmitter housing instead of the original one. A standard 2.4GHz antenna sockets fit well into…
I designed this for my Multiplex 3030 2.4GHz Spektrum conversion. I hope this fits your needs. Have fun!
A spinner mount for original foam spinner as well as a 3mm M8-washer which I needed because my motor was too short. If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture.…
Made for the King Arms/Sig Air MPX-K Sportline AEG, comfortably fits with a matrix 103mm × 21mm × 11mm 7.4v lipo battery and should be able to fit with larger batteries as long as they can fit in the slot in the hole in the receiver, it…
Der Hecksporn sollte in PETG mit ~ 50% Infill gedruckt werden. Er ist stabiler als das Original.
The gimbals of the old Multiplex Profi mc transmitter series are a good basis of a DIY or retrofit transmitter project. Unfortunately they use 5kOhm sliding potentiometer as trim inputs which no modern transmitter mainboard (e.g. Turnigy…
Part of the OpenScan Benchy 3D Scanner comparison, see https://github.com/OpenScanEu/OpenScanBenchy/ We publish all the original files (send by the participants) as well as the aligned version shown in the final rendering. Feel free to…
Wing mount for popular RC aircraft Volantex TrainStar for two MPX connectors. two wings center clamp two MPX connectors mounting for flaps/ailerons/lights bottom part with adjustable connecting length. Best fit! Installing the wing in one…
Adaptateur pour connecteurs Multiplex 6 pins pour l'ASW-15 4m 2026 V1 ( https://cults3d.com/:3834288 ) Paramètres d’impression Infill 5% Top-Bottom: 3 Wall: 2 PLA
I needed a way to turn on the Crestron CNAMPX-16X60 without any modifications to the amp. This involves: (1) A 12v trigger from a preamp (2) A Crestron 24v power supply (3) The 12v trigger is connected to a programmable relay. When…
Ill add details soon
Cynthia MPX style Frontblock
PROJET MINI PHEN X Le projet Mini Phen X (MPX) est né de l'inspiration de la célèbre KayouMini et de la JENO POCKET . L'idée derrière la MPX était de créer une version personnelle et originale de ce modèle mythique, tout en conservant son…
This magazine safety is easier to manipulate and use than a standard chamber flag. It also does not enter the cone of the barrel where abrasion can occur. I developed this to ease the process of making the firearm safe during competitions…
This is a holder for a 6 pin green MPX connector. i use the bracket for the connection of the servos in a wing. The bracket is glued into the wing.
FunCub GoPro GoPro_Mount MPX Multiplex Version 3 GoPro Mount for the RC Funcub from Multiplex you can screw with the wings, easy to mount. The center of the GoPro is over the CW (ca. 80mm) A recess for the ttow release available. With a…
Simple battery cover for the remote from a Nubert nuConnect ampX. The original cover is ridiculous fragile. Print with support.
This magazine safety is easier to manipulate and use than a standard chamber flag. It also does not enter the cone of the barrel where abrasion can occur. I developed this to ease the process of making the firearm safe during competitions…
Waveshare camera 8MPx IMX179 cover. Printed in PETG, that camera chip is hot on the backside. Photos are from mine PRUSA MINI… I did this years ago, and do not exactly remember which model/author I take inspiration from (Thingiverse). I…
