HDM-K1 Motor Mounts and Tentioners for Y Axis Rod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Motor mounts and tensioner parts missing from X only conversion files.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 697
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Due to original conversion for Linear Rail on X only not containing all parts (Motor mounts and tensioners) I modified ones for full conversion to use Rods from Y axis.
I uploaded only the modified parts, for the rest of them you will have to go to original HDM-K1 conversion or his google drive.
Big thanks to Bootycalls Jones as well since I used his CAD files as reference for Rod mounting holes, you can find his conversion here:
https://github.com/tlace17/K1-Linear-Rail-Gantry
You can follow same BOM and assembly instructions from HDM-K1 conversion, only additional item is M6x6 Set Screw which was used in Booty's conversion.
Please tighten these set screws at the end of assembly for better alignment!