Chess Set – Elegant 3D Printed Design with Minimal Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wavy 3D chess set with weighted pieces, minimal supports, and unique terrain board.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 338
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
✅ Key Features
Board Size: 45 x 45 cm
Figure Size: Standard chess dimensions, slightly bulkier for a designer aesthetic and improved feel
Weight Balance: Each figure includes an integrated printed screw at the base to add stability and shift weight low
Unique Board Design: "Castle" zones (starting rows) are raised, while the center battlefield is sunken for a dramatic wavy effect
Print-Optimized: Designed for minimal supports – only a few are required and can be removed easily by hand
Custom Assembly System:
Board is divided into individual squares
Underside of each square has engraved labels for easy placement using the provided assembly scheme
Some squares are printed differently for seamless integration
Flat Print Option: Optionally print the board flat at any uniform height if you prefer a traditional look
Solid Base: I used 3 laminate sheets underneath to keep everything ultra-flat, but you're free to use your own method
Built with PLA+
Printing Time & Material:
~93 hours total print time
~2.5 kg of PLA+ used
Can be reduced if desired, but this version was printed with no compromises
🧩 Assembly Notes
Included is a placement diagram/scheme to match each square to its correct board position
Figures slot neatly into each square and stand balanced due to their internal screw design
Everything is modular – replace individual squares or pieces if needed
No glue required – all parts are fit-designed
🎁 Backstory
This was a gift to my father, a lifelong chess master. I wanted to make something meaningful, beautiful, and tactile. The project took about 2 weeks, though you could do it quicker with full focus. Seeing him admire and play on this custom board made every hour worth it – and now, I hope it brings that same joy to you or someone you care about.
🖨 Recommended Print Settings
Material: PLA or PLA+
Layer Height: 0.2 mm (or lower for best finish)
Infill: 15–25% (figures can be denser for weight)
Supports: Minimal – only where required (mostly internal or undercuts, easily removable by hand)