Kayak Scupper mount for Striker 4 Transducer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two part print intended for mounting a Striker 4 transducer via a scupper hole.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 141
- Wydruki
- 0
- Wyświetlenia
- 753
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a two part model intended for mounting a Garmin Striker 4 transducer via scupper hole on a kayak. The top and bottom pieces can be attached together using zip ties that go through the provided holes. This makes it a bit more adaptable to different sizes scupper holes. This was tested on a Magellan Pro Angler 10.3 kayak.
I recommend printing this in a material that will hold up to UV and saltwater environment. I used ABS.
Note: Be careful using this as you could easily damage your transducer moving your kayak around or hitting things in the water.
You may find some of my other kayak fishing prints useful.
BumpBoard
https://www.printables.com/model/1328581-20-fishing-bump-board
Rail Accessory Cup
https://www.printables.com/model/1328570-kayak-rail-accessory-cup
Rail Paddle holder
https://www.printables.com/model/1324445-kayak-paddle-holder-rail-attachement