20" Fishing Bump Board
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a fishing bump board that is printed in three parts and then can be glued together. 20 Inch.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 103
- Wydruki
- 0
- Wyświetlenia
- 644
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a bumpboard that I made for fishing on my kayak. As with any print dimensions may vary with material and printer so you will want to verify that it measures well after printing.
I recommend using a material that will hold up well out in the elements and that will be strong enough for handling. I used PLA as a test which seem to be working fine but long term it would be better to use something like PETG.
I glued mine together by using epoxy inside the joints and joining edges. This seems to have worked really well.
You may find some of my other kayak fishing prints useful.
Rail Accessory Cup
https://www.printables.com/model/1328570-kayak-rail-accessory-cup
Striker 4 Transducer Scupper Mount.
https://www.printables.com/model/1328553-kayak-scupper-mount-for-striker-4-transducer
Rail Paddle holder
https://www.printables.com/model/1324445-kayak-paddle-holder-rail-attachement