1 / 6
Brushless Motor Mount for Flying Wings (9x9mm or 12x12mm) — zdjęcie 1
1 / 6

Brushless Motor Mount for Flying Wings (9x9mm or 12x12mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Easy Lightweight Brushless Motor Mount for Flying Wings (9x9mm or 12x12mm)

Ocena
0 / 5
Polubienia
2
Pobrania
29
Wydruki
0
Wyświetlenia
191
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

These brushless motor mounts were designed for flying wings to attach common drone motors.

There are three versions, differing in motor size. The mounts must be printed flat and then bent using a torch lighter.This requires some practice, but ensures the layer lines are correctly oriented.

1404 Version; max 1404 Motor, 9x9mm Hole pattern

1808 Version; max 1808 Motor, 9x9mm Hole pattern

2205 Version; max 2205 Motor, 12x12mm Hole pattern

 

For material, I recommend at least PETG, a PC blend, or PA.

As accessories, you'll need two short M3 heat-set inserts from cnckitchen.

 

Enjoy printing!

I am open to your suggestions and feedback and look forward to seeing your 3D creations.

 

 

Tagi