Blowgun painting aids
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Helpful prints to paint your blowgun; end plugs to save the tube, something to put the tubes on and hold it in place.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- GNU Lesser General Public License
Generic Disclaimer:
Most aluminium tubes are not sized very precisely (at least one of mine were), so the models here have been adapted to fit the tubes that I bought.
You will probably need to resize the model (for the 3mf-files) or change the parameters in FreeCAD to fit them to your needs.
To save time and materials, you can cut the models so only the part going over the tube remains (e.g. in Prusa Slicer).
After you found a size that fits snugly with your tubes, print the whole model.
I use only tubes in 20x3mm, 18x3mm and 14x2mm (meaning 20mm outer diameter and 3mm wall thickness, i.e. for 14mm darts). All models should also be adaptable to 22x3 (e.g. for the Cold Steel blowguns).
To save time and materials, you can cut the models so only the part going over/into the tube remains (e.g. in Prusa Slicer).
After you found a size that fits snugly with your tubes, print the whole model.
Helpers for painting you aluminium tubes:
- Plugs for the end of the tubes, so paint does not get inside
- Standoffs to put your tubes on for painting and rotating. Those should be glued to the table.
- Locking rings so the tube does not slide while painting.
I usually do not paint the part where the grip cover will go, so keeping the tube locked in place is important for me :)
Remember to prime your aluminium tubes, most paints don't stick if you don't :)