SawStop Over Blade Dust Port

I needed a way to connect the saw blade cover on my sawstop to the dustcollector in my shop.  This one provides a smooth transition from the end of the blade cover / OverPort to the 2.5 inch dust collector fitting on my overhead rig.  The rib across the top of the port provides a little added rigidity to the bend, and the smooth bend radius keeps the port out of the way of the exiting material, as well as provides a smooth path into the dust collector. 

This design uses the clamping mechanism found here to keep the thing from flopping over while in use (https://www.thingiverse.com/thing:4844847/files).  These clips work with SawStop and Festool equipment. 

I recommend printing this in PETG, as PETG has a little give to it and is less brittle than PLA.  Though, PET, ASA and ABS could work, as well.  I recommend 4 walls (makes the thing pretty much solid), a 3mm inner brim (this is a tall print, and if your bed adhesion isn't great, it could fail part way up.. and a few seconds of deburring is leasy insurance), structural settings (avoid crossing perimeters, slower IS speeds, inner before outer walls, etc.), and fuzzy skin on the outer shell (looks and feels better).

This will work with most standard 2.5 ports, sliding over the port.  I have used this with Rockler, PowerTec and Lee Valley hoses and connectors and this works with all of them.