Liczymy pasujące modele…
Now that you have the best table saw on the market, the Sawstop PCS or Industrial, why not make it even better? This utility drawer fits into the rail slot on the left side and is a perfect place to hold your pencils, pens, marking tools,…
I needed to make a new crosscut sled and thought I’d print the miter slot runners for my SawStop PCS. My printer’s bed didn’t allow for the length I wanted so I had to print it in multiple parts. I made a long and short version so you can…
This is a simple drawer that should fit in the ends of the fence tubing on Sawstop PCS and ICS saws with the T Glide fence. You can just pop the end cap off of the tube and this should fit right in. Pretty much every aspect of this is…
An improved adapter for the SawStop PCS overarm dust collector. The one that comes with the overarm has a hard 90 degree takeoff that results in mediocre flow to the overarm and reduces flow to the saw as well. This “Divided Wye” design…
Small storage bin for use at the end of the table fence locking area. I put a divider in mine but the file does not have a divider since your needs may vary and did not want to box someone in with a too small area. The box is about 61MM…
I wanted to add stock guides to my table saw, and this allows that to happen. so far I feel this is an excellent modification that makes the saw a lot safer. The stock guides have angled wheels to hold the wood to the fence making it much…
After a couple seasons of expansion and contraction on my hard maple table saw miter runners, I needed a solution that would be consistent season to season. These table saw runners for SawStop miter slots were designed to fit on the MK4S…
I have to flip my TS/LS fence whenever I move from table saw to router mode. It's not an exact science, so I always square the fence to the miter slot each time I reset the fence for use with the table saw. I have used the Woodpecker…
Yet another drawer for your Sawstop T-Glide fence extrusion. Just pick the best drawer size for your printer, number of dividers, and handle style from the available shapes. There are 3 styles, each with up to 2 dividers: Handle, for easy…
I wanted to hook up my sawstop CTS to my shopvac, but the host didn't quite fit. Not sure if this adapter will fit other shop vac hoses, but it works great for my shopvac (1-7/8 hose) I uploaded a version 2. Main change is I aligned the…
This is a replacement of the OEM throat plate for the Sawstop CTS. Basically copied the measurement of original saw, connected the split rear end of the OEM design, and made a easier to keep flat zero clearance plate. There are split…
Logos for Powermatic, Proto, Rikon and SawStop. Let me know if you're looking for a particular logo and I'll try and get it for you.
This is a coupler for a SawStop Professional (PCS) cabinet saw. It adapts the dust collection outlet on the cabinet to the Rockler Dust Right® 4" Quick Connect since they are not quite the same diameter. I print this as completely solid…
When building my new workbench, I wanted to incorporate my CTS Tablesaw, but didn't want to lose the ability to remove it from the bench. So I made some clips similar to those that come on the original stand from the factory. With these,…
Background I use an old Festool CT-22 vacuum + Oneida Dust Deputy cyclone separator with my Sawstop PCS and it works well ! This lets me avoid having to buy a bulky dust collector and route 4" duct work around my small workshop. I'm sure…
Fits the 4" Sawstop dust port to a 2.25" shop vac hose. The actual diameters are: Outer: 3 35/64" or 90.17mm Inner: 3 25/64" or 86.17mm Outer: 2 29/64" or 62.312 Inner: 2 19/64" or 58.312
The SawStop Overarm Dust Collection comes with a 4" dust Y-port to connect the blade guard's smaller vacuum hose into the saw's main dust collection port. The problem is the design creates very little suction from the blade guard. The…
It's a weird setup for sure. I needed a fitting to kick up the hose so that it wasn't hitting the sheet good on the way out if I had the blade lowered fairly low. The hose I'm using here is the Rigid 2-½ inch shopvac hose. It doubles as…
Adapter to attach the SawStop Job Site Saw to a 4" Dust Collection Port
This fits just right in the miter slot on my SawStop PCS cabinet saw. I use two of them to attach a featherboard. I think PETG is better than PLA for this application, but either should work fine. I designed it for an M6 bolt, but a ¼…
Simple place for storing router table tools on a Sawstop router table extension. My router insert is made by Incra and this is designed around those tools.
This model was built to redirect airflow when the overhead dust arm is not in use. I do a lot of operations where just the riving knife is inserted and wanted to ensure I had the most under table suction as possible.
I recently had the need to add overarm dust collection to my sawstop CNS I decided to go this route : buy the blade guard with dust collection (TSG-DC) because it is a safety element and DIY the rest of the system (tubing, hose…
A 90 degree sweep for a Sawstop PCS dust port that accepts a Dustright vacuum fitting. It is designed to fit in the bounds of the ICS mobile base (pictured) so that you can fit most outfeed tables tightly up to the mobile base. It is a…
About to print it but wanted to upload the remix first. Just added the logo to the cap
Made for drilling and tapping a ¼" tapped hole in a sawstop t-glide track. 3mf provided for remixing. One use (and the reason I made this): vertical featherboard. T-track gets epoxied and (optionally) screwed straight into the mount.
I created this for a crosscut sled on a Sawstop PCS. You can print as many extension pieces as needed for the length you want to achieve. They print without supports on structure .15 setting, I used PETG for strength. One note, this is a…
This is a dust collection port reducer from 3.5" to 2.25" on the professional cabinet saw. Category: Machine Tools
The Sawstop router box is a beautiful thing. But the dust collection port leaves a lot to be desired. I wanted to be able to use a full sized 4 inch end on the box, and use my overhead hoses for the fence. My workbench setup would not…
I needed a way to connect the saw blade cover on my sawstop to the dustcollector in my shop. This one provides a smooth transition from the end of the blade cover / OverPort to the 2.5 inch dust collector fitting on my overhead rig. The…
I made my own overarm dust collection for my sawstop CNS the stock part for the P-clip is not overly expensive but not cheap either (10.40 USD/pc) (https://www.sawstopstore.com/product/dust-tube-clamp/) But in my case, with using ABS…
The SawStop Inline Router Table comes with a fence that attaches via a 2 ½" dust hose to the main 4" dust port under the table. But when not using the fence, a lot of suction gets wasted, so it is useful to cap the 2 ½" Y-split of the…
CAMLOCK adapter to fit my Sawstop JSS Pro.
I needed to hook up my table saw with my Ryobi 10gal shop vac. Tested with: Saw: Sawstop Jobsite Pro Vac: Ryobi 10gal wet/dry shop vac (40v) (Yes, I know a shop vac isn't the best - its what I have right now)
The original worked well with 5/16" hardware, but I found that it wasn't very strong when I tightened things down on my SawStop PCS. I increased the height of the upper part of the bar by 2.5 mm since there was ‘unused’ height in the…
This adapter fits onto the Sawstop Router fence port and connects to a standard dust collection fitting. I use it to connect to my Rockler hose. Works with my rigid and others. You will find in the images a few examples. Wanted to be able…
The SawStop Blade Guard includes a 1 ¾" vacuum port, but when not using the Blade Guard (e.g. for narrow cuts), you want to cap that vacuum hose so the suction is not being wasted. This is just a 1 ¾" (46mm) diameter circle extruded 15mm…
I couldn't find a runner specifically for my sawstop, so I made my own. I just used wood screw to attach it to my sled. Its a perfect fit horizontally (maybe a little sanding needed if it doesn't run smooth). The wide part of the bottom…
Replacement end cap for the front fence tube, with a 41mm circular opening that fits a pinpoint metal detector. Identical metal detectors are sold under a number of different brands. I have this one:…
I made this so that I could attach a 2.2" clock mechanism to a laser engraved sawblade to make a clock. I don't have a picture of the project, but I will add it here once I get one. Feel free to edit the file to fit your sawblade, I will…
This prints great in PLA. I created this because I had somehow lost a couple of the black plastic end caps for my SawStop outfeed table. This would also come in handy if you want to pretty yours up with a splash of color…like Festool green.
A jig system for reproducing the SAWSTOP PCS throat plate. The key idea is to use 3D-printed jigs to control the Yand Z axes, while the shape of the router bit defines the X-axis cutting profile, enabling a 3D template-based machining…
SawStop Hack, Again @ MKE Gadgets #212 In this video, I helped eliminate wasted space in your stop with the use of My 3D Printer. Link to YouTube video You can follow me: Thingiverse https://www.thingiverse.com/mkegadgets/designs Facebook…
After more than thirteen years of owning a SawStop table saw, which includes a safety braking mechanism to prevent injuries, I finally set it off when I ran the metal fence of my Craftsman miter gauge into the blade. The safety mechanism…
I really liked my over blade port adapter, and it worked well for me for quite a while. But when I changed out the hose ends across my shop, I needed something that would attach to the new style hose ends. So, this model uses the same…
I looked over other models already posted, but I saw comments regarding looseness, so I used Fusion and designed a new version for myself, and I figured I would post it in case anyone else wants a copy. It is quite snug, tolerance is in…
Vertical fence for Sawstop Job-site Pro. The jig fits over the fence providing a vertical surface to clamp your item to. Used for making cuts under 45 degrees. I printed this in draft, but increased the strength (Walls and infill)…
This is a replacement of the OEM throat plate for the Sawstop CTS. Basically copied the measurement of original saw, connected the split rear end of the OEM design, and made a easier to keep flat zero clearance plate. There are split…
I needed a way to connect the saw blade cover on my sawstop to the dustcollector in my shop. This one provides a smooth transition from the end of the blade cover / OverPort to the 2.5 inch dust collector fitting on my overhead rig. The…
