SawStop OverPort to 2.5 Twist Lock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
So, this is my Saw Stop Over Blade Port adapter, but adapted to include the twist lock mechanism I am using on my hoses
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I really liked my over blade port adapter, and it worked well for me for quite a while. But when I changed out the hose ends across my shop, I needed something that would attach to the new style hose ends. So, this model uses the same overall nozzle as the original, but uses the twist locking mechanism I am using on my 4 inch and 2.5 inch hoses, for consistency.
Ideally, this should be printed in PETG for strength and some amount of flexibility, and nearly solid. I used the original for well over a year with no issues. Like the original it uses the same mechanism to clamp to the over blade port found here, courtesy of PwnCNC: https://www.thingiverse.com/thing:4844847/files
I recommend printing this in the orientation shown in the 3mf file, with the large port facing up. You'll needs some painted on supports, and a brim unless your machine has very good adhesion.