Sawstop Jobsite Pro Verticle shallow angle jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Used for cutting angles shallower than 45 degrees on your Sawstop Jobsite Pro.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 29
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Vertical fence for Sawstop Job-site Pro.
The jig fits over the fence providing a vertical surface to clamp your item to.
Used for making cuts under 45 degrees.
I printed this in draft, but increased the strength (Walls and infill) significantly since you are clamping your work to it.
I also added reinforcement for the vertical stop (Visible in the .3mf)
NOTE: The uploaded version has been modified slightly from the images. The jig now sits even with the top of the fence instead of having a ¾ inch gap. I also added a small vertical stop / ledge to aid in keeping the piece vertical and aid in pushing through the cut. See the print file for clarity.