SawStop Overarm Divided Wye
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
remix from @Ross_88426 original model for my own setup with direct connection to 1.5" / 38mm hose
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 674
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently had the need to add overarm dust collection to my sawstop CNS
I decided to go this route : buy the blade guard with dust collection (TSG-DC) because it is a safety element and DIY the rest of the system (tubing, hose connections and wye) because the price point was too high for this
I went with ABS drain pipe and elbow (from HD) for the tubing
And I made my own design for the P-clip attaching the tubes to the side rail (https://www.printables.com/model/659693-p-clip-for-overarm-dust-collection-sawstop)
While looking for a wye to print, I came across the model from @Ross_88426 which has very nice improvements when compared to the stock wye connector from SawStop
I decided to remix it because I do not use the stock overarm so I needed a few adjustments