Grill/BBQ Leveling Blocks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for the Weber Spirit. Model to assist in leveling a grill/bbq or possibly other things!
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 263
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple leveling setup based on my Weber Spirit grill and designed to work with it's caster size. There are a few different sizes for the blocks as well as extensions that attach underneath the main level block.
If extra heights are needed please feel free to reach out.
NOTE: These may not fit all grills/BBQs or other things needing leveling
These settings are suggestions. Change to what you feel will work best for you.
.4 Nozzle
.2 layer height
5 top layers
5 bottom layers
3 walls
50% gyroid infill for added strength
Turn on:
Precise wall
Precise Z height
Filament:
I printed these in PETG while designing this model but strongly recommend a filament that can hold up to temperature and sunlight light - ABS or ASA.
Base plate where the caster will sit on - heights:
2mm
4mm
6mm
Extension risers fit under and around the base plate - heights:
2mm
3mm
4mm
5mm
6mm