Grill/BBQ Leveling Blocks
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed for the Weber Spirit. Model to assist in leveling a grill/bbq or possibly other things!
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 39
- Makes
- 0
- Views
- 263
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple leveling setup based on my Weber Spirit grill and designed to work with it's caster size. There are a few different sizes for the blocks as well as extensions that attach underneath the main level block.
If extra heights are needed please feel free to reach out.
NOTE: These may not fit all grills/BBQs or other things needing leveling
These settings are suggestions. Change to what you feel will work best for you.
.4 Nozzle
.2 layer height
5 top layers
5 bottom layers
3 walls
50% gyroid infill for added strength
Turn on:
Precise wall
Precise Z height
Filament:
I printed these in PETG while designing this model but strongly recommend a filament that can hold up to temperature and sunlight light - ABS or ASA.
Base plate where the caster will sit on - heights:
2mm
4mm
6mm
Extension risers fit under and around the base plate - heights:
2mm
3mm
4mm
5mm
6mm