Knurled Container
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small cylindrical container with a screw cap that can be used to store all sorts of things in your pocket or…
- Ocena
- 5 / 5
- Polubienia
- 157
- Pobrania
- 888
- Wydruki
- 14
- Wyświetlenia
- 3962
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a small cylindrical container with a screw cap that can be used to store all sorts of things in your pocket or bag. You can store something about 15 mm in diameter and 100 mm in length. There is a small cone shape at the bottom to keep anything you put in centred. If printed correctly, this should be airtight.
Print Settings
Printer Brand:
MakerBot
Printer:
MakerBot Replicator 2
Rafts:
No
Supports:
No
Resolution:
100 micrometres
Infill:
25%
Notes:
This will take a while to print due to the knurling. Change the acceleration settings to speed things up.
Category: Other