Modded Back for AOOSTAR WTR Pro With Noctua High-Efficiency Grill
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of Anx256's modded back to add a 140mm fan to the AOOSTAR WTR Pro with an added grill.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 208
- Wydruki
- 1
- Wyświetlenia
- 1208
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Printed using PETG with 100% infill and 0.20mm layer height.
Anx256 created a great model for replacing the back of the AOOSTAR WTR Pro to allow for the use of a 140mm fan instead of the stock 120mm fan. This remix adds a 140mm version of the high-efficiency Noctua fan grill, as I did not want to use the back without a grill.
See Anx256's description on Maker World for more information regarding how to install the back:
https://makerworld.com/en/models/1153112-modded-back-for-aoostar-wtr-pro-better-airflow
Note: I ended up using M3x12 bolts with washers, but M3x10 would likely be ideal. Anx256 recommends M3x8, but I found that 8mm was too short and did not engage the threads at all.