P
PrintablesOop_Ack
Star Wars Snowtrooper Bust
Star Wars Snowtrooper Bust Print instructions 5% Infill with supports
- Pobrania
- 840
- Polubienia
- 124
- Ocena
- 4,2
Wyniki wyszukiwania: wtr
Liczymy pasujące modele…
P
PrintablesReleud
Aoostar WTR NAS R1/R7 cooling improvement
Screen to improve ventilation of the mini PC case. PETG. Layer 0.2. Infill doesn't matter.
- Pobrania
- 532
- Polubienia
- 19
- Ocena
- 0
P
PrintablesBrickDreams
Star Wars Snowtrooper Brick MegaFigures (5:1 Scale)
This is a set of blocks that can be used to recreate two different Snowtrooper figures at 500% scale. Trooper #1 was included with the AT-AT set published in 2003. Trooper #2 was included with the Millenium Falcon set published in 2004.…
- Pobrania
- 448
- Polubienia
- 86
- Ocena
- 5
P
Printablesgomaed
AWTRIX 2 - 4x WS2812 8x8 LED Panel Fully Printable
Hi, so I had some of these 8x8 LED Matrix panels laying around here and wanted to do something with it. I found the awesome matrix project from blueforcer which is open source. I wanted to use these 8x8 panels from CJMCU. Due to the…
- Pobrania
- 325
- Polubienia
- 66
- Ocena
- 5
P
PrintablesNarolinus
Wall Mount for "Ulanzi Awtrix Smart Pixel Clock"
After using a couple of home-made Awtrixes / PixelIts, I recently discovered the pre-built Ulanzi Smart Clocks, which are very cheap and are able to run both PixelIt and Awtrix light. So I added a few to my smart home, but in some places…
- Pobrania
- 318
- Polubienia
- 43
- Ocena
- 5
P
Printablesthall72
Lego Compatible (16501.dat) Minifig Headgear Helmet SW Snowtrooper
This model is compatible with the lego system.
- Pobrania
- 312
- Polubienia
- 55
- Ocena
- 0
P
Printablesthall72
Lego Compatible (44360.dat) Minifig Helmet SW Snowtrooper
This model is compatible with the lego system.
- Pobrania
- 287
- Polubienia
- 44
- Ocena
- 0
P
PrintablesTyler Wiebe
1957 Chevy Apache Towtruck 1/64 scale
This model is really a remix of a remix that I did and a model I did: 1968 Chevy Towtruck 1/64 Scale by Tyler Wiebe | Download free STL model | Printables.com 1957 Chevrolet Apache 1/64 Scale by Tyler Wiebe | Download free STL model |…
- Pobrania
- 233
- Polubienia
- 56
- Ocena
- 5
P
PrintablesTyler Wiebe
1969 Chevy Towtruck 1/64 Scale
A sweet tow truck to add to your collection. Procedure is fairly simple, almost the same as my other models. With this one I gave the option to print the deck separately. I prefer to paint over white plastic, but I wanted a black deck, so…
- Pobrania
- 219
- Polubienia
- 34
- Ocena
- 0
P
Printables9inety
Modded Back for AOOSTAR WTR Pro With Noctua High-Efficiency Grill
Printed using PETG with 100% infill and 0.20mm layer height. Anx256 created a great model for replacing the back of the AOOSTAR WTR Pro to allow for the use of a 140mm fan instead of the stock 120mm fan. This remix adds a 140mm version of…
- Pobrania
- 207
- Polubienia
- 10
- Ocena
- 5
P
Printables3D Crafters
Awtrix 3 Case for WS2812 64 bit
An Awtrix 3 case for a WS2812 64-bit LED matrix is typically designed to house and protect the components of an Awtrix s
- Pobrania
- 159
- Polubienia
- 26
- Ocena
- 0
P
PrintablesFailra
Aoostar WTR Pro - 10in Rackmount Bracket - Version 1
This is a 10in rackable bracket for the Aoostar WTR Pro. The NAS rubber feet need to be removed prior to placing the NAS in the bracket! DISCLAIMER: This was designed using Tinkercad and the geometry is very imperfect. Keep this in mind…
- Pobrania
- 145
- Polubienia
- 19
- Ocena
- 5
P
PrintablesSP1RE3
Clawtrap - Jointed Figure
Recommended settings: (100% scale and 0.4 nozzle) Material Parts PETG, ABS, ASA Layer height First layer 0.2 mm Other layers 0.15 mm Number of perimeters 2 Infill 20%, rectilinear First layer speed 25% of default Elephant foot…
- Pobrania
- 144
- Polubienia
- 48
- Ocena
- 0
P
PrintablesOndrashek
AWTRIX 8x32 WS2812B flex LED with ESP32
I used 2 pieces diffuser from old LCD monitor. Cut to 321x81mm. You will need diffuser frame (without screen) from original project. I made mounting bracket to fasten matrix led down and also used as mounting hole for back cover. Two…
- Pobrania
- 139
- Polubienia
- 20
- Ocena
- 0
P
Printablesewwbananas
Ulanzi TC001 Pixel Clock AWTRIX Device Case
Give your Ulanzi Pixel Clock a Makeover! Ulanzi Smart Pixel Clock TC001 Amazon B&H Official Site The stock white Ulanzi TC001 with its thin bezel is… well… a little plain. This 3D printable case adds color and a refined style! Just print…
- Pobrania
- 118
- Polubienia
- 15
- Ocena
- 0
P
PrintablesSlanjonok
Vulcan 6VF Towtruck Version (1-148)
For more information see Basic version of this lorry: https://www.printables.com/model/1043344-vulcan-6vf6pf-lorry-basic-versions-1-148 There you can find also more cab-versions and the driver figure. Here tow truck or wrecker versions of…
- Pobrania
- 115
- Polubienia
- 14
- Ocena
- 0
P
PrintablesThe Printing Pilot
DIY Social Media Follower Display (Awtrix)
Welcome! We are revisiting our first project, “ DIY Youtube Subscribe ” with a newer, better version! If you're looking for a way to display all your social media followers information in one devices this project is for you! The project…
- Pobrania
- 114
- Polubienia
- 23
- Ocena
- 0
P
PrintablesSP1RE3
Clawtrap - Jointed Figure (REDESIGN)
Hello, this is my second attempt on my Clawtrap figure, this time I made him a more humanoid torso, gave him legs, and remade the hands and feet. Also, I recently played FNAF 4 (yes, it was terrifying 😭) but it heavily inspired me, so a…
- Pobrania
- 89
- Polubienia
- 32
- Ocena
- 5
P
PrintablesOssilampe
AWTRIX BIG Gehäuse
Ich wollte einfach nur ein eigenes Gehäuse für Mein AWTRIX haben, bei dem die Druckzeiten nicht für ein Teil gleich 8h sind.. Touchbutton werden oben nur in den Rahmen eingeschoben und sind von hinten sichtbar. Gehäuse ist auf Rechts und…
- Pobrania
- 85
- Polubienia
- 7
- Ocena
- 0
P
Printables4noxx
LED Matrix Case (AWTRIX 278mm)
Case for a LED Matrix i use 4x WS2812B-64 8x8 LED Matrix from Aliexpress (1,69€ per part) https://www.aliexpress.com/item/1005007273659508.html (BETA VERSION)
- Pobrania
- 80
- Polubienia
- 9
- Ocena
- 0
P
Printablesthall72
Lego Compatible (118762.dat) Minifig Helmet Imperial Remnant Snowtrooper
This model is compatible with the lego system.
- Pobrania
- 65
- Polubienia
- 13
- Ocena
- 0
P
PrintablesOssilampe
Awtrix
Super Projekt leider wird es nicht mehr weiter entwickelt https://awtrixdocs.blueforcer.de/#/ Ich nutze es als Statusanzeige für meinen Prusa. Es gibt eine Erweiterung für Octoprint
- Pobrania
- 46
- Polubienia
- 8
- Ocena
- 0
P
PrintablesDenis Denis
AOOSTAR WTR PRO 14" FAN Mount
This model allows mounting of the 14 inch fan, in my case I've used Arctic 14 Max and it works wonders at cooling, temperatures on HDD are around 33 degrees in the summer. Consider printing with no top and bottom levels for body made of…
- Pobrania
- 37
- Polubienia
- 5
- Ocena
- 0
P
Printableslumixen
Noctua-Style AOOSTAR WTR Pro 140 Fan Back
Remix keeps original bolts (no need for M3x8 bolts), reversed fan grill, adds recessed fan bolt-head pockets.
- Pobrania
- 36
- Polubienia
- 3
- Ocena
- 5
P
PrintablesEh Zeh!
Modded front cover for AOOSTAR WTR Pro to mount 120mm Fan
After adding this mod to my Aoostar WTR Pro cluster (https://www.printables.com/model/1329348-modded-back-for-aoostar-wtr-pro-with-noctua-high-e) to the back of the units, I was left with the 4 original fans without use, so I decided to…
- Pobrania
- 29
- Polubienia
- 6
- Ocena
- 0
P
PrintablesWLCD
AWTRIX ENCLOSURE
This is my version of AWTRIX's enclosure, based on peaberry's diffuser : https://www.thingiverse.com/thing:1903744 AWTRIX is this awesome ESP8266 based IOT clock with lots of features, better check the related website :…
- Pobrania
- 27
- Polubienia
- 6
- Ocena
- 5
P
PrintablesPinball_Maniac
SmartHome AWTRIX LED-Matrix Case - Split-Mod
This is my mod of @WLCD_471142 s AWTRIX enclosure. Big shout out for his awesome work: https://www.printables.com/model/863847-awtrix-enclosure AWTRIX is an fun ESP8266 based IOT clock with lots of features: https://docs.awtrix.com/ It…
- Pobrania
- 25
- Polubienia
- 5
- Ocena
- 0
P
PrintablesFoxs3D
TowTruck Ornament
love towtrucks hers another ornament done by F3D.
- Pobrania
- 25
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPaultier02
ScrewTray Tray
This is an easy to print Tray where you can put yout screws or other parts you are working with. If you want other iterations just ask for it :)
- Pobrania
- 24
- Polubienia
- 6
- Ocena
- 0
P
PrintablesGoran Skarr
Snowtrooper detonator
For my cosplay i made this detonator box for Snowtrooper (Empire strikes back version). Check the size before printed ! You can printing in several parts for easy assembly. Enjoy your prop
- Pobrania
- 22
- Polubienia
- 3
- Ocena
- 0
P
Printableslumixen
AOOSTAR WTR Pro Front Panel
Designed for 5x2 mm neodymium magnets. Each corner has two magnet slots. In your slicer, pause the print at the first layer that covers the magnet holes and insert magnets. At that point, the magnet slot height should be 2.2 mm. With a…
- Pobrania
- 22
- Polubienia
- 2
- Ocena
- 5
P
PrintablesLars
FlowTray Series – Tool 6 | Stackable Tool Organizer Tray With Lids
Organize long hand tools and small accessories in one compact tray with the FlowTray Series – Tool 6 . The layout combines two full-width tool channels with four smaller compartments. It is suitable for items such as screwdrivers,…
- Pobrania
- 19
- Polubienia
- 4
- Ocena
- 0
P
Printablesdaum1988
LED Matrix Case 8x32 bigger with WS2812B Stripes awtrix 3 compatible
I wanted a 32x8 LED matrix display to show relevant stats of my pool on a wall near the pool to not have to rely on an app or something to view water temperature for example. However the standard 32x8 LED displays were to small for my…
- Pobrania
- 16
- Polubienia
- 3
- Ocena
- 0
P
PrintablesLars
FlowTray Series – Original 6 | Stackable Organizer Tray With Lids
Keep your workbench organized with the FlowTray Series – Original 6 , a compact sorting tray with six compartments for tools, screws, nuts, washers and other small parts. Features Six compartments: one long tool channel, one larger parts…
- Pobrania
- 14
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMarek Pokorný
Heated blowtrough cup holder
BE AWARE - This model is purely for esthetics or fun and I don't recommend putting any sort of drinks on top of your computer. Well... I don't really know if there is any need to describe this "invention" :D. Basically it clips to the top…
- Pobrania
- 14
- Polubienia
- 10
- Ocena
- 0
P
Printablesjanxgeist
Crash Derby Towtruck Model
Cute towtruck for the boardgame Crash Derby. You need a tow-truck in a Crash Derby, don't you?
- Pobrania
- 13
- Polubienia
- 9
- Ocena
- 0
P
PrintablesLars
FlowTray Series – Sort 12 | Stackable Small Parts Organizer With Lids
Keep small parts clearly separated with the FlowTray Series – Sort 12 , a compact organizer tray featuring twelve equal compartments in a practical 4 × 3 layout. It is suitable for screws, nuts, washers, electronic components, craft…
- Pobrania
- 13
- Polubienia
- 2
- Ocena
- 0
P
PrintablesOndřej Sluka
YardForce 500 mount for WTRTK-960 GNSS + STA-901 antenna + LSM6DS33 IMU
This holder mounts to two of the standoffs in the front part of the mower. The standoffs are drilled and M3 heat set inserts (I used BOSSARD 1386743) are pressed in. M3 screws are then used to secure the holder. The PCB to the left of the…
- Pobrania
- 12
- Polubienia
- 2
- Ocena
- 0
P
PrintablesKG
Aoostar Wtr Pro back panel with WiFi antennas
This replacement back plate for the Aoostar Wtrt Pro takes on the 120 mm fan and two wifi antennas.
- Pobrania
- 12
- Polubienia
- 1
- Ocena
- 0
P
PrintablesSkuzzy
External PCI-E Card Enclosure for Aoostar WTR Pro Mini Server/NAS
External PCI-E Card Enclosure for Aoostar WTR Pro Mini The Goal: My goal was to replace my old NAS/home server with an AMD-powered Aoostar WTR Pro Mini. However, my old server contains a PCI-E 1x DVB-S2 card used for receiving, recording,…
- Pobrania
- 12
- Polubienia
- 2
- Ocena
- 0
P
Printablesscotty24
Vetus BowTruster Joystick housing
console for VETUS Bow Truster CAN BUS Joystick print with 6 lines for stability
- Pobrania
- 12
- Polubienia
- 3
- Ocena
- 0
P
Printablesfoorschtbar
AWTRIX Magnet Stand
A magnet stand for AWTRIX (Classic/Big). Parts 2x Neodymium Magnet 20mm x 5mm with Hole Links The links to AliExpress are advertising links. I would be happy if you use this link, but of course you don't have to. I have linked exactly the…
- Pobrania
- 11
- Polubienia
- 2
- Ocena
- 0
P
Printablesfuchsr
Octenol Attractant Holder for Flowtron Mosquito Magnets
Super simple but very useful – the stuff that 3D printing was invented for 🙂 I have a couple of Flowtron mosquito magnets in my yard but replacing octenol has always been a hassle. The cheap octenol cartridges I buy don't come with…
- Pobrania
- 9
- Polubienia
- 2
- Ocena
- 5
P
PrintablesKelleyArtAndDesign
Bowtroller VR Bow Controller
This “Bowtroller” utilizes the Logitech MX Ink stylus for a VR bow and arrow game submitted to the XR Design Challenge. Check out the project here: https://lnkd.in/gGstTXjU The bowtroller allows players to pull back on a steel rod and…
- Pobrania
- 8
- Polubienia
- 2
- Ocena
- 0
P
Printablesbitpearl
Newtral NT001 chair - rueda ajuste seguimiento lumbar
hola, me compre una silla newtral NT001 y me llego con la rueda pequeña del ajuste del seguimiento lumbar rota, y como no queria hacer una devolucion para no perder el tiempo ya que el resto esta perfecto y necesito una silla ya, y…
- Pobrania
- 7
- Polubienia
- 3
- Ocena
- 0
P
Printableseffendi
Awtrix shelf for Ikea Scadis
Awtrix stable display shelf with drawers (optional) for Ikea Scadis
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
PrintablesLars
FlowTray Series – Electronics 12 | Stackable Parts Organizer With Lids
Keep electronic components and small tools organized with the FlowTray Series – Electronics 12 . The tray combines ten small component compartments with two full-width tool channels. It is suitable for resistors, connectors, headers,…
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
PrintablesLars
FlowTray Series – Sewing 8 | Stackable Sewing Organizer With Lids
Keep sewing tools and supplies organized with the FlowTray Series – Sewing 8 . The tray combines six bobbin compartments, a long tool channel and a dedicated bay for the removable Cushion Holder. Add your own fabric and suitable padding…
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
PrintablesIrrevanent
MUD/WTR Frother Head Adapter
The frothers that MUD/WTR sells are decent but they decided to change the heads on the handles to ones that don't fit their old attachments. The original style has the adapter sitting on the motor but I designed these to fit permanently…
- Pobrania
- 3
- Polubienia
- 1
- Ocena
- 0
P
PrintablesAdam
Replacement light guide for Acteon Newtron LED Scaler Handpiece E12903
This light guide is designed to fit the Acteon Newtron LED Scaler Handpiece and is a replacement for the original (part E12903). The first picture shows the scaler with the replacement part inserted, and the second shows an original to…
- Pobrania
- 3
- Polubienia
- 2
- Ocena
- 0
P
PrintablesLars
FlowTray Series – Compact 4 | Low-Profile Stackable Organizer Tray With Lids
Organize larger small parts and accessories without using unnecessary height with the FlowTray Series – Compact 4 . This low-profile tray has four equally sized compartments in a clear 2 × 2 layout. It is suitable for fasteners,…
- Pobrania
- 3
- Polubienia
- 1
- Ocena
- 0
P
PrintablesLars
FlowTray Series – Model 4 | Stackable Model-Building Organizer With Lids
Keep model-building tools, small parts and paint bottles organized with the FlowTray Series – Model 4 . The tray combines a long tool channel, two parts compartments and a dedicated bay for one of two interchangeable four-bottle racks.…
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
PrintablesLars
FlowTray Series – Artist 4 | Stackable Art Supply Organizer With Lids
Organize brushes, palettes and small paint tubes with the FlowTray Series – Artist 4 . The tray combines a long brush channel, a large palette compartment and two smaller compartments for paint tubes or other art supplies. The layout is…
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
PrintablesLars
FlowTray Series – Office 7 | Stackable Desk Organizer With Lids
Keep pens, markers and small office supplies organized with the FlowTray Series – Office 7 . The tray combines one long pen channel with six equally sized compartments for clips, erasers, staples, USB drives, measuring tools and other…
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
PrintablesLars
FlowTray Series – Palette 6 | Removable Paint Palette
Mix and organize colors with the removable FlowTray Series – Palette 6 . The palette has six rounded paint wells and one larger mixing area. It is designed to fit inside the large palette compartment of the FlowTray Series – Artist 4…
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
PrintablesLars
FlowTray Series – Pen & Brush Cup | Removable Upright Insert
Keep pens and brushes upright with the removable FlowTray Series – Pen & Brush Cup . This compact cup is designed as a loose insert for the accessory compartments of FlowTray Series – Office 7 and the two paint-tube compartments of Artist…
- Pobrania
- 2
- Polubienia
- 0
- Ocena
- 0
P
PrintablesLars
FlowTray Series – Jewelry 7 | Stackable Jewelry Organizer With Lids
Organize rings and small jewelry with the FlowTray Series – Jewelry 7 . The layout combines four long ring channels with three larger compartments for earrings, bracelets, pendants and other accessories. An optional full-size SVG cutting…
- Pobrania
- 1
- Polubienia
- 1
- Ocena
- 0
P
PrintablesLars
FlowTray Series – Game 6 | Stackable Board-Game Organizer With Lids
Sort board-game components and tabletop accessories with the FlowTray Series – Game 6 . Six equal compartments provide space for tokens, counters, smaller dice and other loose game pieces. Each compartment includes a broad sloped…
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
PrintablesLars
FlowTray Series – Cushion Holder | DIY Pincushion Insert
Create a removable pincushion insert for the FlowTray Series – Sewing 8 with the FlowTray Series – Cushion Holder . The printed part forms a shallow holder for fabric and suitable padding. It fits the dedicated bay in Sewing 8 and can be…
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
PrintablesLars
FlowTray Series – Bottle Rack 32 | Four-Bottle Insert
Organize four hobby bottles inside the FlowTray Series – Model 4 with the removable Bottle Rack 32 . The insert fits the dedicated bay in Model 4 and provides four circular recesses with nominal 32 mm CAD openings. It is intended for…
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
PrintablesLars
FlowTray Series – Bottle Rack 26 | Four-Bottle Insert
Organize four hobby bottles inside the FlowTray Series – Model 4 with the removable Bottle Rack 26 . The insert fits the dedicated bay in Model 4 and provides four circular recesses with nominal 26 mm CAD openings. It is intended for…
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
Printables
Octenol Attractant Holder for Flowtron Mosquito Magnets
Super simple but very useful – the stuff that 3D printing was invented for 🙂 I have a couple of Flowtron mosquito magnets in my yard but replacing octenol has always been a hassle. The cheap octenol cartridges I buy don't come with…
P
Printables
Aoostar WTR Pro - 10in Rackmount Bracket - Version 1
This is a 10in rackable bracket for the Aoostar WTR Pro. The NAS rubber feet need to be removed prior to placing the NAS in the bracket! DISCLAIMER: This was designed using Tinkercad and the geometry is very imperfect. Keep this in mind…
P
Printables
Aoostar Wtr Pro back panel with WiFi antennas
This replacement back plate for the Aoostar Wtrt Pro takes on the 120 mm fan and two wifi antennas.
P
Printables
MUD/WTR Frother Head Adapter
The frothers that MUD/WTR sells are decent but they decided to change the heads on the handles to ones that don't fit their old attachments. The original style has the adapter sitting on the motor but I designed these to fit permanently…
P
PrintablesMonxou
Skeeride Snowtracks for TRX-4
I wanted some tracks for my TRX-4, I have tried the official Traxxas ones and i was disappointed by their performances in the snow. I had built a Skeeride 2 From BuildItBetter and the track on this little sled works so great, I wanted to…
- Polubienia
- 33
- Ocena
- 0
P
Printables
Dust filter holder for Aoostar WTR Pro
A simple holder for dust filter on WTR PRO NAS. No special options to print. Category: Computer
P
Printables
Newtral MagicH Part C
So I backed this nice office chair Newtral MagicH Pro in Kickstarter but the package was missing this part c to use the detachable laptop table. Luckily its very simple design and I have printer so until I get an answer about the missing…