FlowTray Series – Palette 6 | Removable Paint Palette
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Removable six-well paint palette with a large mixing area, designed for the FlowTray Series Artist 4 organizer.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mix and organize colors with the removable FlowTray Series – Palette 6.
The palette has six rounded paint wells and one larger mixing area. It is designed to fit inside the large palette compartment of the FlowTray Series – Artist 4 organizer and can be lifted out using the internal grip opening.
### Features
- Six paint wells.
- One large mixing area.
- Rounded internal corners for easier cleaning.
- Internal grip opening for removal from Artist 4.
- Removable accessory; it does not have its own stacking interface.
### Dimensions
- Overall size: 106.8 × 81.6 × 12 mm.
- Six paint wells: approximately 25.8 × 24.53 mm each.
- Mixing area: approximately 47.2 × 77.6 mm.
- Nominal well depth: 9.6 mm.
- Nominal wall thickness: 2 mm.
- Nominal base thickness: 2.4 mm.
- Nominal clearance in the Artist 4 palette compartment: 0.6 mm per side.
All dimensions are nominal. Actual fit depends on printer calibration, first-layer expansion and filament. The palette is not a sealed or certified leak-proof paint container.
### Compatibility and use
The palette is designed for the large compartment in FlowTray Series – Artist 4. Do not use the palette itself as a cover or as a stacking base. Remove it before stacking Artist 4 trays.
Printed layer surfaces are not automatically liquid-tight or solvent-resistant. Test a small amount of the intended paint on a printed sample first. Compatibility with paints, cleaners and solvents is not guaranteed. This model is not a tested wet palette.
### Suggested print settings
- Orientation: flat base on the build plate, wells facing up.
- Nozzle: 0.4 mm.
- Layer height: 0.20 mm.
- Walls: 3 perimeters.
- Bottom layers: 5.
- Infill: 15–20%.
- Supports: designed to print without supports.
- Material: PLA is a suitable starting option for dry indoor use.
These are suggested starting settings, not a tested print profile. Use the appropriate profile for your printer and filament, inspect the sliced preview and print at 100% scale.
### Files and validation
STL, STEP and a geometry-only 3MF are provided together with the editable CAD source. The 3MF does not contain a configured printer profile.
The geometry has been digitally checked as a closed, single-part mesh. The STEP file was successfully re-imported and the 3MF geometry matches the STL.
The model has not yet been physically test-printed or slicer-tested. Actual fit, leak resistance and chemical compatibility remain unverified. All preview images are CAD renderings, not photographs of a printed model.
If you print it, please share a Make and let me know how it fits in Artist 4 and how it behaves with your chosen paint.