Liczymy pasujące modele…
Generic half pan dimensions: 19 x 16 x 9.5mm Winsor and Newton variant dimensions: 19 x 15.75 x 8.6mm Some of the W&N palettes will only accept their own slightly shorter pan sizes so I've included this variant. I have many other…
A portable watercolor and mixing palette kit that can be secured to your sketchbook using foldback clips (up to 40 mm). It allows for different mounting layouts, snaping in place and closing using magnets (Ø 5mm x 2mm). Perfect for urban…
This is a folding, print in place watercolor palette. I developed this because I wanted a tray with fewer paint wells and more mixing spots than any of the trays on Amazon Let me know in the comments how it works for you and if there's…
Simple case with lid for 20 half pan water colors and a couple of pencils. Created in OnShape - document is here: https://cad.onshape.com/documents/096698f5602ff8094f2ace0b/w/67410470c2b1b469f3691b6e/e/ac44ae02b019629a8dcda0b6 19-09-2019…
A template to create cards that you can use to create watercolour swatches. Based on a design my wife described to me. Just trace in the open areas and then apply your watercolour to create a swatch card.
Standard-sized HALF PANS and WHOLE PANS for your Watercolour Palettes! The walls are thin, so there's less material usage AND you have more room for PAINT! In the photos, you can compare with the pans from Schmincke & White Nights. A…
Generic full pan dimensions: 30 x 19 x 9.5mm Winsor and Newton variant dimensions: 30 x 19 x 8.6mm Some of the W&N palettes will only accept their own slightly shorter pan sizes so I've included this variant. I have many other watercolor…
This is a meticulously designed watercolor paint tray tailored for enthusiasts and professionals alike. Crafted for a precise fit, the tray is optimized for the insertion of van Gogh watercolor paints. Key Features: Print-In-Place Hinge:…
Remixed a smaller version of this excellent watercolor box. Holds 16 standard half pans. Requires 3 large and 3 normal paint trays (STLs included) and 16 standard half pans. Prints OK without supports but settings have to be locked in for…
Transform your old mint tin into a new paint palette with this six color watercolor paint palette insert! It can accommodate six colors and a spot for a sponge. Print at your preferred layer height, no supports required. Plus, the…
A pan for small watercolor brushes. Suitable for brushes from number 1 to number 10, maybe more. Size 135*60*6 mm.
A simple watercolor palette with 60 wells in a ~5"x7" space. This also fits within these tins very well, if you prefer a snap-to-close lid: https://www.amazon.com/Pack-Container-Large-7-25-Crafftin/dp/B076TJ75KT Print instructions This…
Empty watercolor palette of 36 units created for half pan. Compatible with Van Gogh, Winsor&Newton brands. Standard half-pan. The lid part is suitable for use as a mixing palette. It is modeled for PLA material but is also suitable for…
This Altoid paint tray has six 2cm x 2cm x 1.4cm deep inserts for dry/solid paint blocks. Six paint brush holders 4.6mm round and a 1.1cm x 3.6cm x 1.2cm rinse/mix insert. July 23rd 2020 Update Added V2 version that is slightly narrower…
Edit 18 Aug 2023: A kind user ( @BeckyMarriott_597138 ) asked me about the different tube sizes shown in my original cover photo, and I realized that my workflow changed in the middle of this design! When I first designed this piece (the…
I created this system because we have a lot of watercolor half pans that we rotate out of our field sets. We don't really like the metal storage systems and also like having some space around our half pans when using them, this storage…
Introducing the ultra-compact watercolor palette, the perfect artistic companion for your on-the-go adventures. This tiny treasure fits snugly in your pocket or bag, ensuring you can indulge your creative impulses anytime, anywhere. Dive…
if you need a smaller pan than half pan, print this :)
SLOPED Standard-sized WHOLE PANS for your Watercolour Palettes! Two versions! One with a flat area at the bottom only, and the second with a flat area at both the top and the bottom of the slope. The horizontal layer lines which are a…
This Travel Watercolor Palette is a compact, foldable companion designed for watercolor artists who prioritize portability. With a thoughtful layout and optimized for 3D printing, it’s perfect for outdoor sketching, travel journaling, or…
This version requires some force to pop it in the tin, but won't come out. It's helpful to put a few dots of hot glue inside before pressing the palette in the tin so that it doesn't move around at all.
Standard-sized ROUNDED CORNER PANS for your Watercolour Palettes! Can't quite squeeze in that last pan into your palette? Does that sharp corner get in the way of that pesky lip on your metal palette? This is your solution! These Corner…
Standard-sized SPLIT PANS for your Watercolour Palettes! Maybe you can't decide between 2 colours. Or maybe there's a few colours that you don't use often but can't stand to leave out of your palette. These Split pans will give you more…
A simple half pan for watercolor paint holders Outer dimensions are: 19.0mm long 15.5mm wide 9.5mm tall
New size! KURETAKE GANSAI TAMBI PANS for your Watercolour Palettes! Do you love using big giant fluffy brushes? Do you need more space to mix up a rich, saturated wash? Try out some big Kuretake pans! The horizontal layer lines which are…
If you have a palette that will only take full pans but you want half pans this is the print for you. This model is 2 half pans in the package of a full pan split down the middle. Each section is roughly 1.5-1.75ml capacity. Outer…
Great for making a large palette of small amounts of paints, prints fast. Outer diameter of 19 x 15 x 5mm. I have many other watercolor pan models of various sizes, you can view them in this collection .
Easy to print mini watercolor pan. With 12x12x5mm outer dimensions. Great for small palette with loads of colors. I recommend printing a few at a time spaced out on your build plate so they have time to cool down. Fits 0.3ml of paint. I…
Hi Makers & fellow Artists! I've wanted to print something like this for a while, but didn't find an open-source model. I have provided my source code in case someone wants to modify it. Please read the information before printing because…
My kindergarten teacher friend wanted a watercolor tray to give to the kids so they could have entertainment out and about at restaurants and etc (there's always water available to fill them on the go). It fits the standard mint tin trays…
printed in PLA and does hold all paints well but does have some flex and likely would benefit from a stiffer material. Arms are 2.5mm thick which is close to max to slide easily.
This tray expands the storage capacity of a Sennelier watercolor tin palette from 48 to 60 half-pans, 30 full-pans, or a combination of both. Dimensions: 104mm X 205 mm X 15mm fits most watercolor 48 half-pans tin palettes (check…
While in bed one day I wondered how to best design some basic tools for my watercolor hobby. So I pulled out my design software, brushed off the cobwebs, and got to work! I have created a set that includes a double rinse cup, one side for…
This portable kit is designed to fit 15 full sized pans or 25 half pans. It has 2 paint palletes included.
This is a mini palette I made because a tiktok i found, named it "STORMY WATERCOLOR" as I modeled during a Stormy night. (…
These pans are in the style and size of Kuretake Gansai Tambi pans and are PERFECT for getting large amounts of paint on large brushes. Use this to add different colors to your existing palette or start your own. Holds 7.8ml of paint and…
6x4" mixing pallet for watercolors to fit well with the Jetpens watercolor set. 6 total pallets.
Compact Plein Air Kit Board – Perfect for Watercolor & Sketching on the Go! Designed for quick setup and easy use in the field. • Built-in magnets hold metal palette boxes in place — or swap in Velcro strips for plastic ones. • Handy…
New size! THREE QUARTER (3/4) sized PANS for your Watercolour Palettes! Is a Half Pan too small for your brushes to fit into? Does a Whole Pan hold more paint than you'll ever use? Try out a Three Quarter Pan for a happy medium! Just like…
A simple Stencil to make watercolor swatches for tin palettes. This stencil fits the following palettes: Small watercolor tin palette 12 half pans (fits up to 18 half-pans) Medium watercolor tin palette 24 half pans (fits up to 36…
Amanda's Light Switch Plate - Watercolor Tree
This case for watercolor can be used for half size cups of color. I used for this build color from the brand Schminke, based in Germany. I printed it with a Bambu P1S with AMS. The basis and the palett for the colors need to be pushed…
Just a simple accessory set for paints. Included is a double water cup for clean and dirty water, a brush rest with a tray for a paper towel to dab off your brushes from extra water/paint, and also a variety of three different palettes to…
A pan for small watercolor brushes. Suitable for brushes from number 1 to number 6. A small tray for dripping paint. Size 45*60*6mm.
This is a mini watercolor paint palette that is perfect for taking on the go. Fully printable!!! No extra parts are needed (besides paint) It can hold up to 24 different colors of watercolor paint and has 9 mixing trays. Assembly…
For the painters among you, two little frames to "swatch out" watercolors on paper.
This was a gift for my artistic sister. It is a fairly large palette (15"x19.5") with 48 wells and 8 mixing chambers. Due to its size, it was split into 4 quadrants, all printed separately on a Prusa i3M3 in PETG, and then glued together…
This model was made to store small amounts of watercolor paint (squeezed from tubes and allowed to dry) so I'd have something super-compact to take with me in my travel kit. Works well with a water brush pen. I tend to activate the colors…
If you want to be flexible in changing colors in you Sketcher's Pocket Set palette, these pan will help you. This model also contains pans to be put in the brush container (replacing the brush). I am using a small piece of Blue Tack for…
Unfortunately pans and expansion pans for the Portable Painter Classic palette are not available in Europe, especially in Germany. So I created these pans for my own Portable Painter palettes. A small lid is supposed to be used by a plier…
This watercolor half pan has additional space to write a label. Sometimes I refill half pans from tubes and want to keep track of the name, and sometimes I make specific mixes and want to know what I did at a glance. Fits regular half pan…
I designed this rack to be screwed into the bottom of a shelf to save space compared to the original retail rack. The informational strips with the paint colors and barcodes must be cut down in order to fit on the front. Print 2 of each…
This is a set of watercolor half pan storage bins for the Gridfinity organization system. Both holders are 3x2, with a 3x2x2 variant and a 3x2x3 variant. The 3x2x3 variant is suitable for stacking for additional storage. The 3x2x2 variant…
Umton watercolor palette for six colours Print instructions Category: Hobby Summary Umton watercolor palette for six colours
Designed to fit the "Sunkist Sours" tin, this will hold Watercolor paints in small plastic trays (usually comes with watercolor paints). The bottom tray sits in the bottom of the tin and should be glued or taped in.
Brush holder which holds the brushes in a horizontal position
Holds 5 tubes of your favorite paint that are 5ml and 8ml sizes. Should fit most brands but I only have a few different ones that I like to use. 2 separate files, the 8ml will fit any tube smaller than 8ml too. You can choose what works…
This stencil works with most tin palettes, and you can make a personalized grid using half pans or full pans. 100% infill recommended.
Stackable Watercolor Paint Tube Tray Remix
insert for the new schmincke watercolor box so you can have 28 colors
I found this really nice stand for paint tubes, and I remixed it for Gridfinity.
This is a remix made for my wife that modified the palette by GekoPrime to have 16 spots for mixing colors instead of 8. Orient vertically on the bed with the slanted side of the hinge facing down to reduce the need for supports.
This model was originally made as a gift for my girlfriend 💙 Ra, if you’re reading this, I love you! It’s designed with portability in mind, especially for use with water brushes (the kind you can fill with water), making it ideal for…
Best printed with a brim of 5 layers and supports on for the magnet slots.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size Swap Instructions: Start with Black At layer #14 (1.2mm) swap to Marine Blue At layer #18 (1.52mm) swap to Grey At layer #21…
I wanted to make this palette as my first print with wood PLA. I had just enough white to get the mixing pan printed, as I prefer that to be white for accurate color mixing. At time of posting, I'm still waiting for my magnets... but the…
Watercolor Palette A clean and minimal watercolor palette designed for artists who love simplicity and functionality. Perfect for everyday painting or travel use. 6 semicircles for any color you like. Parameters: base: 3 mm holes: 14.375…
Mini Painter's Palette for Sketchbooks 🎨 Take your creativity anywhere with this Mini Painter's Palette , designed to fit perfectly inside a sketchbook, travel journal, or handmade art notebook. Inspired by compact plein-air painting…
##########WORK IN PROGRESS########## I like to move my watercolor pans around for different projects, so I don't like any regular watercolor pan boxes. This box is magnetic, so I can move things around as much as I want. BOM: 8mmx3mm…
A friend of mine asked if i could print replacement half pan's for her aquarell box. They are not 100% identical but have a perfect fit. Vriendin vroeg of ik napjes kon printen voor haar aquarel doos. Het is niet 100% identiek maar past…
Simple pans to be hold by magnets in a metallic palette. The magnets are placed in a small compartment right under the color container. The magnets can easily be inserted and removed (best with a small screwdriver). The size of the round…
A simple Stencil to make watercolor swatches for small travel palettes. This stencil fits the following palettes: Whiskey Painters Schmincke Horadam Retro Travel set of 8. Schmincke Horadam Aquarell travel set of 8. Tonic Watercolors,…
A small transportable Box for watercoloring. The box has compartments for a small drawing pad (credit card size paintings), a palette and an inlet for 12 watercolors. Additional, the box has two compartments for unpainted and painted…
You do not need CFS or AMS for this print or any of my other prints. Add a pause on the correct level and change the filament. Then continue on. You can resize but not the height. Design Concept The Watercolor Shark sculpture is inspired…
A simple watercolor paint holder designed to fit in a Savon de Marseille soap tin. Dimensions palette: 94.5 x 59.5 x 11 mm. The tin is spacious enough to accommodate two palettes. I printed the palette using PETG filament with Prusament…
I designed this tiny palette as a way to be able to give out samples of watercolor paint to friends, but it is also the perfect palette to take with you for painting on the go! The model uses either 5x2mm neodymium magnets (4 on the lid,…
Enforced the cover at the hinge locations so they are more robust and less likely to break. Made larger mixing area.
My wife wanted a portable painter https://www.portablepainter.com/ but they do not ship to Australia so I created this to do the same thing. It is a travel case that holds 12 half pans and 2 folding brushes.…
Description A compact travel box that is designed for watercolor and drawing on the go. It consists of three parts with different purposes: Lid: Doubles as the protective lid and the paper holder. Paper sheets can be stored here in the…
Currently working on a new revision, sorry about the difficult latches! If you want a different size, let me know.
I like to color my doodles that I do on work breaks, so I designed this. It allows me to use a water brush, and my favorite colors and have everything ready to go, so that I don't need to bring containers of water, paints, pallets, etc.…
This was made to accompany an existing watercolor kit that I made and realized I needed a way to blend colors. I have no idea how to actually paint with watercolors but this kit is inspiring me to try. It's thin, just two .2mm layers with…
These are ultralight watercolor trays for when you need to bring your painting supplies with you when every gram counts. To use these, fill the paint pans with your choice of paint from tubes and allow to dry for 24 hours. Features Light…
A 3D-printed travel-size watercolor painting palette (89mm * 84mm * 11mm), that fits in the Always travel tin (91mm * 86mm * 12mm). You can adjust the palette size according to your travel tin : )
This is a fast and easy print for 50mm watercolor pucks like used at school or Kindergarten. Hexagon design to keep them organized on the table and stackable for storaging. Theres a cut and the botton so your color can dry properly while…
This is a watercolor half pan with a wall in it to allow it to hold two colors. I needed a split pan that would fit inside my favorite palette , and this particular pan fits it perfectly, so I remixed it to fit my needs.
One of my first models, but still maybe the one I'm the happiest with. Printed in black inland PLA but should print in anything. No magnet holes or screws but can add if requested. Holds with a snug but easy to remove fit that I like.…
The original make from Pegstr is amazing! For those that want something already done, I made this watercolor Koi Pocket Field Sketch Box holder, for my Brazilian standard Eucatex size. I made adjustments so the bin can fully close,…
Fits in the Grabie travel watercolor tray, my partner has it nested on top of another tray (thank you @kfernald) for mixing her paints. Have fun!
Bring the elegance of watercolor art into the world of 3D printing with this stunning single-line elephant design. T his HueForge piece is based on my original hand-drawn watercolor artwork , capturing the fluid beauty of continuous line…
My wife dose a lot of water color and she was always dipping the brush in the wrong side of the cup so she asked me to make one that had a half height side for painting water and a full height side for cleaning water. Feedback is it…
This project presents a laser-cut hack that allows you to create a functional, modular watercolor palette holder by fusing multiple acrylic layers using only a laser cutter —no glue or fasteners required. The technique involves cutting…
Meant as a prototype for a kid friendly water color plate and water mixing area
This box and lid will keep your brushes from drying out. It works well with watercolor and acrylic paints. Best way to use it: Fold and place a paper towel in the large compartment and moisten it generously with water. Cut a sponge to the…
You'll find explanations in french on my website : https://labidulerie.vicou.be/presentoir-aquarelle/ Made in 2 pluggable parts. The upper part should be placed so that the top is on the print bed. No supports The brush holder is a foam…
Half Moon and Quarter Moon Lens Covers
The current dimensions are 40 x 45 mm, suitable for the applied tin can. The OpenSCAD source is provided so other dimensions are easy to create. By attaching a magnetic adhesive strip to the pans can be fixed to the tin can.
This is a mini watercolor paint palette that is perfect for taking on the go. Fully printable!!! No extra parts are needed (besides paint) It can hold up to 24 different colors of watercolor paint and has 9 mixing trays. Assembly…
This was made to accompany an existing watercolor kit that I made and realized I needed a way to blend colors. I have no idea how to actually paint with watercolors but this kit is inspiring me to try. It's thin, just two .2mm layers with…
![[WIP] MODULAR WATERCOLOR PANS BOX(magnetic)](https://media.printables.com/media/prints/243349/images/2195307_6b230621-882a-4668-b7f8-75f567950083/img_7028.jpg)
