Watercolor 60 half-pan tin palette insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tray insert for a 48 half-pans Sennelier watercolor tin palette to hold 60 half-pans instead.
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 109
- Wydruki
- 3
- Wyświetlenia
- 730
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This tray expands the storage capacity of a Sennelier watercolor tin palette from 48 to 60 half-pans, 30 full-pans, or a combination of both.
Dimensions: 104mm X 205 mm X 15mm fits most watercolor 48 half-pans tin palettes (check dimensions of your palette before printing)
I have personally tested the fit of half-pans from Sennelier, Daniel Smith, and Blick-branded, and the three fit perfectly in the tray. Winsor and Newton fit in the tray but feel loose since the pans are 1mm shorter.
* Schmincke half-pans do not fit because the dimensions are different.
I have an Ender 3 V2. The print takes around 9 hours, but depending on your machine, you can get a shorter printing time. I’m also uploading a test print so you can print and check your printer settings and the overall fit of the pans before committing to a 9-hour print.
The tray is designed to load the pans from the side, not the top. It’s printed in PLA with 20% infill; no supports are needed.
Enjoy!