Watercolor 60 half-pan tin palette insert
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€7.14 – €8.73 net (excluding VAT)
For file: CE3E3V2_48HalfPansPalette-60HalfPansTray.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.93 excluding VAT (range midpoint).
- Weight reported by the author
- 77 g
- Print time reported by the author
- 9 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A tray insert for a 48 half-pans Sennelier watercolor tin palette to hold 60 half-pans instead.
- Rating
- 5 / 5
- Likes
- 30
- Downloads
- 109
- Makes
- 3
- Views
- 733
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This tray expands the storage capacity of a Sennelier watercolor tin palette from 48 to 60 half-pans, 30 full-pans, or a combination of both.
Dimensions: 104mm X 205 mm X 15mm fits most watercolor 48 half-pans tin palettes (check dimensions of your palette before printing)
I have personally tested the fit of half-pans from Sennelier, Daniel Smith, and Blick-branded, and the three fit perfectly in the tray. Winsor and Newton fit in the tray but feel loose since the pans are 1mm shorter.
* Schmincke half-pans do not fit because the dimensions are different.
I have an Ender 3 V2. The print takes around 9 hours, but depending on your machine, you can get a shorter printing time. I’m also uploading a test print so you can print and check your printer settings and the overall fit of the pans before committing to a 9-hour print.
The tray is designed to load the pans from the side, not the top. It’s printed in PLA with 20% infill; no supports are needed.
Enjoy!