1 / 1
Ultralight Portable Watercolor Tray w/Snap-on Lid — zdjęcie 1

Ultralight Portable Watercolor Tray w/Snap-on Lid

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Small, lightweight halfpan watercolor trays with snap-on lids. Available in 3x2 or 2x2 and with rectangle or round pans

Ocena
0 / 5
Polubienia
2
Pobrania
13
Wydruki
0
Wyświetlenia
61
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

These are ultralight watercolor trays for when you need to bring your painting supplies with you when every gram counts. To use these, fill the paint pans with your choice of paint from tubes and allow to dry for 24 hours.

Features

  • Light and compact. Take it on long hikes.

  • Snap on lid is secure and satisfying

  • Mixing wells in lid

  • Available in four or six color versions

There are two sizes: four-color (2x2) and six-color (3x2), each in either oval or rectangular pans. The rectangular pans accept standard halfpan size cakes (about 1.5 ml). The oval pans are about 1.0 ml.

note: The lid is not water tight. Try not to leave excess water in the pans after painting and before storing the tray with the rest of your gear.

Print settings

  • wall loops: 3

  • top/bottom layers: 3

  • infill: 5%

I use arachne wall generator and inside/outside/inside wall order.

This model has been tested mostly in PLA and PETG, but should also work in ASA for ultimate UV/weather resistance.

Files

You need to download both a tray file and a corresponding lid file to print. The tray files have this naming convention:

<pan columns>x<pan rows>_<pan size>_<pan shape>_tray.stl

The lid files have this naming convention:

<pan columns>x<pan rows>_<pan size>_<clearance>_lid.stl

The important thing is to get matching sizes (2x2 or 3x2). The lids come in three clearances (loose, normal, tight). Start with the normal clearance, but if it is too tight or not secure enough try the "loose" or "tight" variations.

History

  • June 17, 2026: Improve lid fit tolerance

    • Change groove profile to have less steep exit angle

    • Increase size of opening tab (and place on long side)

    • Add slots near opening tab to increase lid flexibility

Tagi