travel watercolor pallet and brush holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A lasercut and 3dprinted case that fits 9 quarter pots, a waterbrush, and has a pallet for mixing colors.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 167
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I like to color my doodles that I do on work breaks, so I designed this. It allows me to use a water brush, and my favorite colors and have everything ready to go, so that I don't need to bring containers of water, paints, pallets, etc. everywhere I want to paint.
Supplies needed:
Two tiny hinges
Waterbrush
Latch or magnets (just drill tiny holes and glue them in place to hold the lid closed)
½ watercolor pans (fill with your preferred colors)
Wood (I use two different size, one for the two middle pieces and one size for the top/bottom (not sure on size, but It was poplar from lowes.
After cutting the wood, I glue a top to a middle piece and the bottom to a middle piece. I used the router to chamfer the edges and attached the hinges. Sand, put in the pans, add the 3dprinted pallet, and it is pretty much done. If you want a latch or magnets, add then last, so that you can make sure everything lines up
I added some hand drawn scroll work to give it some pizzazz, but it is purely cosmetic
Note: for the pallet, feel free to scale the Z down in the slicer. I printed the Z at 50% and that seemed to work best for me. It mostly depends on the thickness of wood that you picked