travel watercolor pallet and brush holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A lasercut and 3dprinted case that fits 9 quarter pots, a waterbrush, and has a pallet for mixing colors.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 14
- Makes
- 0
- Views
- 164
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I like to color my doodles that I do on work breaks, so I designed this. It allows me to use a water brush, and my favorite colors and have everything ready to go, so that I don't need to bring containers of water, paints, pallets, etc. everywhere I want to paint.
Supplies needed:
Two tiny hinges
Waterbrush
Latch or magnets (just drill tiny holes and glue them in place to hold the lid closed)
½ watercolor pans (fill with your preferred colors)
Wood (I use two different size, one for the two middle pieces and one size for the top/bottom (not sure on size, but It was poplar from lowes.
After cutting the wood, I glue a top to a middle piece and the bottom to a middle piece. I used the router to chamfer the edges and attached the hinges. Sand, put in the pans, add the 3dprinted pallet, and it is pretty much done. If you want a latch or magnets, add then last, so that you can make sure everything lines up
I added some hand drawn scroll work to give it some pizzazz, but it is purely cosmetic
Note: for the pallet, feel free to scale the Z down in the slicer. I printed the Z at 50% and that seemed to work best for me. It mostly depends on the thickness of wood that you picked