1 / 2
FlowTray Series – Palette 6 | Removable Paint Palette — image 1
1 / 2

FlowTray Series – Palette 6 | Removable Paint Palette

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Removable six-well paint palette with a large mixing area, designed for the FlowTray Series Artist 4 organizer.

Rating
0 / 5
Likes
0
Downloads
4
Makes
0
Views
18
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial — Share Alike

Mix and organize colors with the removable FlowTray Series – Palette 6.

The palette has six rounded paint wells and one larger mixing area. It is designed to fit inside the large palette compartment of the FlowTray Series – Artist 4 organizer and can be lifted out using the internal grip opening.

### Features

- Six paint wells.

- One large mixing area.

- Rounded internal corners for easier cleaning.

- Internal grip opening for removal from Artist 4.

- Removable accessory; it does not have its own stacking interface.

### Dimensions

- Overall size: 106.8 × 81.6 × 12 mm.

- Six paint wells: approximately 25.8 × 24.53 mm each.

- Mixing area: approximately 47.2 × 77.6 mm.

- Nominal well depth: 9.6 mm.

- Nominal wall thickness: 2 mm.

- Nominal base thickness: 2.4 mm.

- Nominal clearance in the Artist 4 palette compartment: 0.6 mm per side.

All dimensions are nominal. Actual fit depends on printer calibration, first-layer expansion and filament. The palette is not a sealed or certified leak-proof paint container.

### Compatibility and use

The palette is designed for the large compartment in FlowTray Series – Artist 4. Do not use the palette itself as a cover or as a stacking base. Remove it before stacking Artist 4 trays.

Printed layer surfaces are not automatically liquid-tight or solvent-resistant. Test a small amount of the intended paint on a printed sample first. Compatibility with paints, cleaners and solvents is not guaranteed. This model is not a tested wet palette.

### Suggested print settings

- Orientation: flat base on the build plate, wells facing up.

- Nozzle: 0.4 mm.

- Layer height: 0.20 mm.

- Walls: 3 perimeters.

- Bottom layers: 5.

- Infill: 15–20%.

- Supports: designed to print without supports.

- Material: PLA is a suitable starting option for dry indoor use.

These are suggested starting settings, not a tested print profile. Use the appropriate profile for your printer and filament, inspect the sliced preview and print at 100% scale.

### Files and validation

STL, STEP and a geometry-only 3MF are provided together with the editable CAD source. The 3MF does not contain a configured printer profile.

The geometry has been digitally checked as a closed, single-part mesh. The STEP file was successfully re-imported and the 3MF geometry matches the STL.

The model has not yet been physically test-printed or slicer-tested. Actual fit, leak resistance and chemical compatibility remain unverified. All preview images are CAD renderings, not photographs of a printed model.

If you print it, please share a Make and let me know how it fits in Artist 4 and how it behaves with your chosen paint.

Tags