FlowTray Series – Pen & Brush Cup | Removable Upright Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Removable upright cup for pens and brushes, designed to fit the Office 7 and Artist 4 FlowTray organizers.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 6
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Keep pens and brushes upright with the removable FlowTray Series – Pen & Brush Cup.
This compact cup is designed as a loose insert for the accessory compartments of FlowTray Series – Office 7 and the two paint-tube compartments of Artist 4. It is useful for pens, markers, brushes and other slim upright tools.
### Features
- Upright storage for pens, markers and brushes.
- Fits six accessory compartments in Office 7.
- Fits both paint-tube compartments in Artist 4.
- Rounded internal corners.
- Removable insert with no magnets or additional hardware.
### Dimensions
- Overall size: 51.6 × 38 × 65 mm.
- Nominal inner opening: 47.6 × 34 mm.
- Nominal wall thickness: 2 mm.
- Nominal base thickness: 2.4 mm.
- Nominal clearance in the intended tray compartments: 0.6 mm per side.
All dimensions are nominal. Actual fit depends on printer calibration, first-layer expansion and filament. Tall or heavy tools can make the loose cup tip; it has no locking interface.
### Compatibility and stacking
The cup fits the six accessory compartments in Office 7 and the two paint-tube compartments in Artist 4. Remove the cup and all upright tools before stacking another FlowTray tray on top. The cup does not have its own stacking interface.
### Suggested print settings
- Orientation: flat base on the build plate, opening facing up.
- Nozzle: 0.4 mm.
- Layer height: 0.20 mm.
- Walls: 3 perimeters.
- Bottom layers: 5.
- Infill: 15–20%.
- Supports: designed to print without supports.
- Material: PLA is a suitable starting option for dry indoor storage.
These are suggested starting settings, not a tested print profile. Use the appropriate profile for your printer and filament, inspect the sliced preview and print at 100% scale.
### Files and validation
STL, STEP and a geometry-only 3MF are provided together with the editable CAD source. The 3MF does not contain a configured printer profile.
The geometry has been digitally checked as a closed, single-part mesh. The STEP file was successfully re-imported and the 3MF geometry matches the STL.
The model has not yet been physically test-printed or slicer-tested. Actual fit and stability depend on your printer, filament and contents. All preview images are CAD renderings, not photographs of a printed model.
If you print it, please share a Make and let me know how it fits in Office 7 or Artist 4.