FlowTray Series – Pen & Brush Cup | Removable Upright Insert
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Removable upright cup for pens and brushes, designed to fit the Office 7 and Artist 4 FlowTray organizers.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 5
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Keep pens and brushes upright with the removable FlowTray Series – Pen & Brush Cup.
This compact cup is designed as a loose insert for the accessory compartments of FlowTray Series – Office 7 and the two paint-tube compartments of Artist 4. It is useful for pens, markers, brushes and other slim upright tools.
### Features
- Upright storage for pens, markers and brushes.
- Fits six accessory compartments in Office 7.
- Fits both paint-tube compartments in Artist 4.
- Rounded internal corners.
- Removable insert with no magnets or additional hardware.
### Dimensions
- Overall size: 51.6 × 38 × 65 mm.
- Nominal inner opening: 47.6 × 34 mm.
- Nominal wall thickness: 2 mm.
- Nominal base thickness: 2.4 mm.
- Nominal clearance in the intended tray compartments: 0.6 mm per side.
All dimensions are nominal. Actual fit depends on printer calibration, first-layer expansion and filament. Tall or heavy tools can make the loose cup tip; it has no locking interface.
### Compatibility and stacking
The cup fits the six accessory compartments in Office 7 and the two paint-tube compartments in Artist 4. Remove the cup and all upright tools before stacking another FlowTray tray on top. The cup does not have its own stacking interface.
### Suggested print settings
- Orientation: flat base on the build plate, opening facing up.
- Nozzle: 0.4 mm.
- Layer height: 0.20 mm.
- Walls: 3 perimeters.
- Bottom layers: 5.
- Infill: 15–20%.
- Supports: designed to print without supports.
- Material: PLA is a suitable starting option for dry indoor storage.
These are suggested starting settings, not a tested print profile. Use the appropriate profile for your printer and filament, inspect the sliced preview and print at 100% scale.
### Files and validation
STL, STEP and a geometry-only 3MF are provided together with the editable CAD source. The 3MF does not contain a configured printer profile.
The geometry has been digitally checked as a closed, single-part mesh. The STEP file was successfully re-imported and the 3MF geometry matches the STL.
The model has not yet been physically test-printed or slicer-tested. Actual fit and stability depend on your printer, filament and contents. All preview images are CAD renderings, not photographs of a printed model.
If you print it, please share a Make and let me know how it fits in Office 7 or Artist 4.