Clawtrap - Jointed Figure (REDESIGN)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remake of my Clawtrap figure
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 89
- Wydruki
- 1
- Wyświetlenia
- 557
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello, this is my second attempt on my Clawtrap figure, this time I made him a more humanoid torso, gave him legs, and remade the hands and feet. Also, I recently played FNAF 4 (yes, it was terrifying 😭) but it heavily inspired me, so a nightmare clawtrap may come soon 😈
Recommended print settings:
Material | Parts | PETG, ABS, ASA |
Layer height | First layer | 0.2 mm |
Other layers | 0.15 mm | |
Number of perimeters | 2 | |
Infill | 20%, rectilinear | |
First layer speed | 25% of default | |
Elephant foot compensation | 0.15 mm | |
Supports | Yes | |
Brim | As needed (depends on bed adhesion) | |
Perimeter generator | Arachne | |
Additional settings | ☑ Print external perimeters first OR ☑ Only one perimeter on first layer | |
Hope you enjoy! :)