Clawtrap - Jointed Figure (REDESIGN)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remake of my Clawtrap figure
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 89
- Makes
- 1
- Views
- 557
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello, this is my second attempt on my Clawtrap figure, this time I made him a more humanoid torso, gave him legs, and remade the hands and feet. Also, I recently played FNAF 4 (yes, it was terrifying 😭) but it heavily inspired me, so a nightmare clawtrap may come soon 😈
Recommended print settings:
Material | Parts | PETG, ABS, ASA |
Layer height | First layer | 0.2 mm |
Other layers | 0.15 mm | |
Number of perimeters | 2 | |
Infill | 20%, rectilinear | |
First layer speed | 25% of default | |
Elephant foot compensation | 0.15 mm | |
Supports | Yes | |
Brim | As needed (depends on bed adhesion) | |
Perimeter generator | Arachne | |
Additional settings | ☑ Print external perimeters first OR ☑ Only one perimeter on first layer | |
Hope you enjoy! :)