Aoostar WTR Pro - 10in Rackmount Bracket - Version 1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
10in, 4u rackmount bracket (poorly) designed for the Aoostar WTR Pro
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 145
- Wydruki
- 1
- Wyświetlenia
- 1284
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a 10in rackable bracket for the Aoostar WTR Pro. The NAS rubber feet need to be removed prior to placing the NAS in the bracket!
DISCLAIMER: This was designed using Tinkercad and the geometry is very imperfect. Keep this in mind when printing. I had issues printing it on my Elegoo Centauri Carbon, where three parts of the print failed, but this did not prevent the print from completing. It is likely to fail if you print this on a bedslinger.
The top cutout also needs some adjusting. it JUST barelly allows for things to be plugged in.
My print: PETG-CF, 6-8 walls, 35% infill. This will use over 500g of filament.
Feel free to improve off this model!