Ambient Weather Display HSW Mount WS-2902D
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed from the SKADIS original by aiannazzone.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted to mount my weather station to my HSW. I found @aiannazzone's model, where they had already done most of the work. I stripped off the SKADIS clips and added pegs. Works exactly as I wanted!
I maintained the flat-side of the original so that it can be printed without supports. This means that you'll need two M3 screws (I used these, the screw head fits perfectly inside the keyholes on the weather station).
Copying and pasting some useful text from the original model:
This was designed for the display with my WS-2902D kit, but I think it will work with other models. The spacing between the keyholes was 73.5mm.
I would print with a brim to ensure good bed adhesion.
Required materials:
- Two M3 screws with heads that aren't too thick. I used M3x6 with 3mm thick heads. That provided a nice tight fit. (As stated above, I used a countersunk head screw)