Liczymy pasujące modele…
A stylish stand for an Ambient Weather WH31 temperature/humidity sensor. I think the thermometer is the same as the Ecowitt WH31. (I believe Ecowitt makes the Ambient Weather product.) Printed on a Prusa Mini+, 0.2mm layer height, 2…
Ambient light switch housing. Sensor : https://share.temu.com/Ja6Y6HETMRB
Growla — Ambient Fold Lamp Growla is a compact 3D-printable ambient lamp designed to bring soft, cozy light to your desk or living space. Designed specifically for the RGBW KC007 light module:…
This is a bit of a tricky print, I wasn't able to get a clean finish on the top of the sphere using my MK4S, so I decided to just have a hole in it since I was putting it in the corner anyways. I've included files to print this in vase…
If you’re looking to add a splash of color to your desk or create a cozy atmosphere in your room, building a smart LED lamp is one of the most rewarding entry-level electronics projects. In this post, I’ll walk you through how I built a…
Raspberry Pi based automated audio player. Use it in any room where you want to create an ambiance! I use this device plays ambiant sounds, such as forest, rain or wind recordings. The audio is started as soon as movement is detected, and…
The best way to print them is at a 45 degree angle, with brim and 0.2mm nozzel. Best to make them out of Abs but if you are very crefull with them can also work with Petg. They should not need supports.
Print it with 0.15mm layer hight and black matte PLA. The notch simplifies installation. This makes it easy to screw in. Use at your own risk.
This was designed specifically for the Segway GT1 / GT2. Print it and stick it to the under side of the scooter with some double sided tape and press in the lights. It will take some force to press in the lights as it is designed to be…
I bought a rather pricey Japanese wall set in Bauhaus only to discover the rail (Expo Ambiente Smart Set) has to be mounted with a couple special plastic snap-mounts (either to the ceiling or to an wall-mounted L profile), both ending up…
3D Printed Parts: Lamp Body Lamp Base Pipe Fitting Bottom Cover Lamp Body: Make sure to scale the Lamp Body to 100x100: Lamp Body Model Additional Parts: Wemos D1 Mini (or other ESP8266 board) WS2812 LED Matrix 16x16 (Make sure it's 5V…
A wall-mounting bracket for the Ambient Weather Outdoor PM25 (PM2.5), which for some reason ships with screws but no mounting holes. The sensor simply slides in/out of the top for periodic recharging. The bracket uses the side lugs of the…
Мой Carlinkit имеет сильно греется, поэтому установил дополнительный радиатор который мешает прикрепить Carlinkit на двусторонний скотч. две детали необходимо склеить суперклеем, что даст ровную площадку и место под радиатор
Support for the compressor's ambient humidity filter. Print preferably in PETG or ABS. Although PLA can work perfectly
This project provides a 3D-printable mount designed to illuminate your computer keyboard using LED strips. The mount easily attaches to the underside of your desk, positioning the LED strip to provide comfortable and functional ambient…
A stylish stand for an Ambient Weather WH31 temperature/humidity sensor. I think the thermometer is the same as the Ecowitt WH31. (I believe Ecowitt makes the Ambient Weather product.) Printed on a Prusa Mini+, 0.2mm layer height, 2…
*** Note: this printer has not been fully tested since I do not know the proper Arduino Uno and CNC Motor Shield firmware updates I need to operate the four (4) independent axes simultaneously. There are three (3) axes of motion for the…
The lamp consists of three parts. A base for an E27 socket (41 mm) or a Bambu LED Kit 001, a lampshade and a top cover. RGBW Zigbee bulb used. The cover can be blind or with seats for zigbee buttons. Xiaomi Mijia IKEA STYRBAR (white) The…
I wanted to mount my weather station to my HSW. I found @aiannazzone 's model, where they had already done most of the work. I stripped off the SKADIS clips and added pegs. Works exactly as I wanted! I maintained the flat-side of the…
I’m using the sensor in my Prusa XL enclosure. It’s controlled via the ESP32 camera . I soldered the wires on the camera side and routed them through the lower ventilation slots of Michael Fanta’s ESP camera case . Inside the sensor…
The LG UltraFine 5K Monitor incorporates an embedded ambient light sensor for automatic brightness adjustment. However, when illumination originates from behind the display, the sensor fails to register it, resulting in insufficient…
Dezentes Licht für gemütliche Abende. Folgende Teile werden benötigt: 4x z_Eckverbinder 1x LED Stripe 10mm breite 1x LED Aluprofil (14x7mm) schwarz mit milchiger Streuscheibe 1x RGB Kabel 1x Transparente Zuleitung (3 oder 4 x0,14mm²) 1x…
A small and compact ambiance light powered by a USB-C ESP32 D1 Mini and a WS2812B LED Ring , running WLED for full RGB lighting control. Bill of Materials The lamp was designed to perfectly fit the following components: USB-C ESP32 D1…
🌟 DIY Ambient Lamp. Seasonal Design (Christmas & Summer) Bring cozy light and smart functionality to your home with this DIY ambient lamp featuring interchangeable seasonal lids! This design includes: ❄ Winter Lid – decorated with a…
BOM: Printed with ROSA3D High Speed PLA Signal Violet This candle holder is all about the atmosphere. The design consists of tall, vertical ribs that encircle the flame, creating a cozy "cage" effect. Why print this? Light Play: When the…
Ambient light switch housing. Sensor : https://share.temu.com/Ja6Y6HETMRB
This 3D-printable enclosure is designed for the ESP8266 D1 Mini LED candle controller project. It provides a compact and stable housing for the custom PCB, with dedicated openings for the Micro-USB connector and enamelled copper wire…
Growla — Ambient Fold Lamp Growla is a compact 3D-printable ambient lamp designed to bring soft, cozy light to your desk or living space. Designed specifically for the RGBW KC007 light module:…
This is a desk/table mount for the monitor for Ambient Weather stations. It is designed to allow the monitor to sit upright on a flat surface confidently without fear of knocking it over, which happens using the inbuilt legs. Comes in…
Nice black ambient lamp led 250 lumen warm with socket G9 220/230 volt i used brass insert nuts & screws M2,5 *8
KEY FEATURES A modular 4-in-1 LED lighting system designed for easy 3D printing and clean, modern lighting. This cylindrical lamp with 217 mm (L) × 106 mm (H) creates a soft ambient glow, making it ideal as a night light, mood light, or…
This free version is compatible with standard LED strip lights, making it simple to assemble and use. The cylindrical lamp, measuring 217 mm (L) × 106 mm (H), produces a soft ambient glow, perfect as a night light, mood light, or…
This is an enclosure for the Techtonics Elements model TEBM35C10 BMR drivers. https://www.parts-express.com/tectonic-tebm35c10-4-bmr-2-full-range-speaker-4-ohm--297-216 In this enclosure they can play down to about 200Hz, but I use them…
This is a bit of a tricky print, I wasn't able to get a clean finish on the top of the sphere using my MK4S, so I decided to just have a hole in it since I was putting it in the corner anyways. I've included files to print this in vase…
If you’re looking to add a splash of color to your desk or create a cozy atmosphere in your room, building a smart LED lamp is one of the most rewarding entry-level electronics projects. In this post, I’ll walk you through how I built a…
Raspberry Pi based automated audio player. Use it in any room where you want to create an ambiance! I use this device plays ambiant sounds, such as forest, rain or wind recordings. The audio is started as soon as movement is detected, and…
The best way to print them is at a 45 degree angle, with brim and 0.2mm nozzel. Best to make them out of Abs but if you are very crefull with them can also work with Petg. They should not need supports.
Pendulum is a compact table lamp built around a clean dome shade, a deep green base, and a gold silk accent that swings over the top like a suspended frame. The shape is simple, but that curved ring changes the whole silhouette and gives…
Wall mount for the Ambient Weather Receiver, it tilts the unit up at about a 30 degree angle. Printed with QiDi ABS-Odorless Blue, 15% Gyroid in-fill @ 50% print speed.
It's another lamp! This lamp utilizes this light cord to function. Simply watch this video for assembly instructions. Print Instructions: Layer height: 0.2mm Supports: Lamp - Yes Everything else - No Thank you for your time and…
This is a mode of UFO LED lamp with WLED installed on EPS32 It's important to print "Beam" and "LED deflector" with WHITE PLA in spiral vase mode with only one wall To built it you also need some M3 bolts and nuts, also a few hot inserts…
Summary LumaBloom is a 3D printable enclosure for a DIY ambient light sensor device that automatically adjusts monitor brightness based on surrounding light. The device is designed as a decorative flower: the sensor is placed in the…
And the Ambient Control project needs something where the user can scream at and smash inputs to the code. A dashboard / control panel / User Interface. I had a few requirements : Fit inside the side of the IKEA LACK table. House 2…
Ambientador desmontable para colocar lo que desees y colgarlo en el armario. La tapa superior le puedes modificar el relleno con Prusaslicer. Filamento: PLA Resolucion: 0,2 No necesita soportes
This is a model for a spot ambient light with WLED. Prints completly without support. The following electronic parts are needed: WLED controller - https://github.com/Hasenpups/WLED_All-in-one_ESP32_Controller or something similar LED…
In order to block as much as possible ambient light from surrounding civilization I've designed this Ambient Light Protector for my Levenhuk Ra 150C Cassegrain telescope. It's push to fit design. Also the original cover fits well when you…
The case prints best at 0.16 with defaults settings in Prusa Slicer due to the thin grille around the sensor.
den Sockel unbedingt mit support drucken, das Lampenglas transparent. Für die Lampenfassung einfach eine Gu10 Lampenfassung im Baumarkt kaufen. Das Zwischenteil was hier nicht zum download bereit steht habe ich auf einer anderen Webseite…
Esta es una alcancía ambientada en Minecraft que tiene un diseño normal pero se puede ambientar con las letras y colores, para el diseño de las letras utilice un abecedario de Minecraft que se puede descargar en Printables ( en mis…
I made this model so I can install the horizontal poles which are 22.5mm ⌀ and the tent poles are 16mm ⌀ but the pole fixture was 22mm ⌀ on the original piece, so I decided to design a custom model which fits my needs, hope I can help…
Discover the compact, multi-sensor breakout board, perfect for your next innovative project in wearables, IoT, and more! Check the full project on PCBway:…
I needed a home for my Ambient controller PCB for 3Dprinter enclosures. So I made this box. PCB and Code now available here : https://github.com/acekrystal/Servo-Ambient-Controller I had a few requirements : Fit inside IKEA LACK table and…
Hue White and Colour Ambient Lightstrip Plus Table Mount
Made an adaptor for flat top mounting an ambient weather station ws-2902 onto poles or 4x4 posts. Mounts with 1 long lag of about 7-8 inches, and 1 fender washer. Mount this to the top of the wood pole or post and then install the weather…
install with 10mm led strip print with rectilinear infill
The anemometer (wind-speed detector) on my WS-1200 was destroyed in a hailstorm. The rest of the weather station was completely undamaged, so I didn't want to just trash it. This is my replacement part. I don't have them to compare with,…
My Froggit weather station includes the Froggit DP80 rain gauge. It came with a 32mm, 200mm long, mounting pole and brackets to screw to the rain gauge. This design has a ball that fits around the pole and a joint type stand to screw to a…
This is a protective housing for the Ambient Weather WH31P Water Proof Probe Temperature Sensor. I have a metal building that wouldn't allow me to place my sensor inside so I created this to hang on the door sill outside and sense the…
Rain gauges need something to prevent birds from perching like metal prongs around the top, but some designs are not always effective. A filter can help prevent their droppings and other small wind-blown debris from getting inside the…
I mounted this on an automation cabinet at my house to compliment my Samsung tablet I use for dashboards!
Nice snoflake ambient lamp - you can put some lights inside and enjoy. You may try printong with minimal amount of infill and perimeters, as model can get quiet heavy when printed with prusa slicer default settings. I included both gcodes…
The displays from Ambient Weather have a keyhole mount, but those holes do not align with the 40mm IKEA SKADIS pegboards. This small adapter will accept two M3 screws and had hooks that neatly fit into the pegboard. This was designed for…
Probe and cable holder for the Thermoworks Ambient Air temperature probe included with some of their system. It prints in two parts that slip fit together but could also be secured with CA glue if necessary. It is part of a completely…
Ersatzträger für Cafehausstangen Durchmesser = 12 mm Maße: 30x12x19 [LxBxH] [mm]
Ich habe für den Wohnzimmertisch ein Ambientlight erstellt aus zwei Teilen. Für den unteren Teil habe ich Holz PLA von Geetech mit 10% Infill verwendet und für den Schirm oben PVB von Polylogic. Das Hinterher mit Isopropanol geglättet…
Simple lamp printed in vasemode. 0.2mm height, with PLA matte the lamp has a 6.5w energy-saving led bulb assemble both parts with an e27 socket or hang it without a base to your ceiling
A case for an ambient light sensor using a Seeed XIAO RP2040 microcontroller and a generic BH1750 light sensor. The case has a sleek cubic design and is modular. The microcontroller mount for the XIAO is easy to replace and remodel, in…
Ford Focus MK4 brackets to stick the Aliexpress ambient footwell LED's on. The brackets will fit into the original mounting positions where normally the factory ambient lights will be installed. Somehow left and right have a slightly…
Print instructions: Lamp bottom part Layer height: 0.2mm Infill: 15% Material: PLA/PETG Print it laying on the upper side without any supports Lamp cover Print in Vase Mode! Layer height: 0,2mm Infill: 0% Perimeters: 1 Top solid layers: 0…
This is my ambient monitoring station box for my PRUSA MK4. The project is based on the Adafruit Feather ESP32 with BME sensor (P/N 5303) that will measure the outside ambient temperature, pressure and humidity. Inside the enclosure is…
This is a simple lightbar with tilt regulation that goes on the back of the monitor to light up the wall behind it. The 2 rods (part a and part b) are connected with a 20mm m3 bolt and a hex nut. The LED strip is mounted with double sided…
I designed a simple bracket to hold two IKEA TRÅDFRI E27 bulbs behind my monitor. It mounts using the standard VESA 100×100 pattern and has clips that fit a common type of E27 socket. I also added a newer version that holds a C7/C8–style…
