Ambient Lights Bulbs E27 - monitor vesa mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket to hold 2 light bulbs behind monitor for Vesa100x100
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 561
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed a simple bracket to hold two IKEA TRÅDFRI E27 bulbs behind my monitor. It mounts using the standard VESA 100×100 pattern and has clips that fit a common type of E27 socket. I also added a newer version that holds a C7/C8–style power plug instead of using a simple cable passthrough hole.
The main reason I made this was because I wanted all my ambient lighting to be controllable with a single IKEA STYRBAR remote.
What you’ll need:
M4 screws for attaching the bracket to the VESA mount. Most monitors with 100×100 use M4×10, but depending on your setup you might need slightly longer ones, these will hold both the bracket and the monitor at the same time.
A power cable (AC cord with a plug) to power the bulbs.
PETG filament. The bulbs I use generate a bit of heat, so I printed it in PETG just to avoid any chance of warping.
2× E27 bulbs of your choice.
An E27 socket like the one shown in the photos—it’s a very common, generic type.
