Liczymy pasujące modele…
A functional lampshade with a voronoi like pattern for E27 lamp sockets that have outer threads (like the IKEA Hemma cord set). Video tutorial: https://www.youtube.com/watch?v=6cxxnytzxkY I have also included a model that can be used as a…
Wydruk około 7,65 €–9,35 € nettoWstępna wycena jednego wariantu
These models are remixed from Frank Dreschner's “Designer Lithophane Moon Lamp” [1], and raTmoles' lithophane solar system [2]. I extracted the bajonet adapter from Dreschner's original model and fitted it to the respective 3D model.…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
firts one i printed with 0.4 nozzle and spiral mode, but is was very fragile. second attempt 0.6 nozzle this one came out nicly for the hole in the base switch off the: remove al holes, in the menu mesh fixes (if you wan a vase, don't do…
Wydruk około 1,96 €–2,39 € nettoWstępna wycena jednego wariantu
This is a bracket for mounting E27 lamp holders (40mm diameter) behind televisions or monitors with VESA 200 mounts (max. M6 screws). The angle can be adjusted in 30° steps. To do this, simply insert some 1.75 mm filament into the two…
Wydruk około 4,07 €–4,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have lost this part for my lamp so I made one. Inner thread diameter is 40mm. Tested in PETG.
Needed a replacement nut for our lampshade, so I made one. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 20% Filament: Prusament PETG Signal White
Douille complète en fichier STEP pour utiliser lors d'un design afin de calculer si les dimensions sont exactes et positionner son ampoule correctement. Je ne trouvais pas ce genre d'objet en step ou F3d donc je l'ai fait pour fabriquer…
E26/E27 bulb sockets cost $3 to buy, this costs 0.30 cents to print! That's 90% savings to help justify your 3D printer purchase. I found Salvatore's 3D model fit the threads of light bulbs very well, however I wanted a more traditional…
E27 LED Lamp Kit A modular lamp designed around a cheap E27 renovation socket. This kit features a single base model paired with three interchangeable lampshade options. The shades in the photos are printed with Bambu PLA Basic Beige.…
This is a working wall lamp holder for E27 socket bulb. Do not use with a voltage higher than 24 volts. Print instructions No need support
A parametric FreeCAD model is included.
The lamp shade is held in place merely by the bulb itself. It fits on E27 “retro” LED bulbs and cheap sockets from DIY stores. Only use LED bulbs, incandecense bulbs become too hot! Printed using Prusament Galaxy Black PLA on a Prusa…
Beautiful Lampshade for Ceiling Lamp Size 247mm x 172mm with E27 base. Optimized with E27 Base and stretched a little bit for best quality in vasemode. Print Suggestion: Vasemode with 0,2 layer height 6 bottom layers / 1,2 mm bottom…
small ring that fits perfect.
I have several spare sockets, but unfortunately they are mostly without any rings that screw onto the socket. I have identified two types of threading that slightly differs. One has an outer diameter of 40.2 mm and a pitch of 2.4 mm. The…
Death Star lamp for E27 lamp socket. Both models need supports.
I have remixed this beautiful lamp to have a larger hole (D=41mm) for standard E27 mounts and have also added 25mm to the height to allow space for even the largest E27 bulbs. The lithopane size needs to be adjusted to 115x90mm (height x…
Here in the Czech Republic, slightly different components are available than those used by the author of the original model. So I modified the original model a bit to finish this great lamp. 1x Emos power cord…
Modular Customizable Lamp for 1000 logos E27 (Batman, Star Wars and other stuff) A lamp in which you can change the logo, insert the company logo, your favorite superhero badge or any other graphics from the game. It is enough to add or…
Deadt star lamp - full holder for e27 bulb
I wanted to control a 3D printed lamp I got from MakerWorld with my homeassistant but didn't want to spend money on an E27 smart bulb So this is inteded to fit the same hole as a regular E27 socket and has the space to fit a tiny…
There was a need to add light bulb to the ceiling light, o I created this project.
A printable lampshade with included holder. I recommend to print it in a heat and UV resistant material so it holds up for a while and dont release harmful gases from the hot bulb. Assembly Slide the holder down the lampshade until it…
The 220V voltage in ceramic sockets is exposed and poses a hazard. This involves covering these connections in a simple and stylish manner.
I have some older SLV Gloo mounted around the gate. Plastic retainers broke and one of them had the globe fall down thanks to the wind. Bought 3 GLOOs secondhand for the price of a new spare globe thinking I could just replace the globe…
Learnt from my previous builds. No more gimmicks this time, just a simple desk lamp. Feel free to remix on my Tinkercad . PARTS LIST These are my AliExpress affiliate links. They don't cost more, but I do make a small commission - That…
Dies ist ein Lampenschirm für eine e27 Fassung. Für das Projekt habe ich folgende Dinge genutzt. Als Kleber kann natürlich auch jeder andere genutzt werden. Die 3 STL Dateien Lampenfassung e27 E27 Lampe (In meinem Fall ich ich eine e27…
Design Concept This minimalistic lamp is designed with a sleek, modern aesthetic in mind, perfect for contemporary interiors. The smooth gradient surface texture adds an elegant touch to the overall design, making it not just a functional…
Various E27 screw rings for attaching pendant lamps. One rounded nut for the visible area, directly after the lamp. Two covers that can be cut to the appropriate length. For power cables with a 5 mm diameter. Verschiedene E27 Schraubringe…
Lampe (e27) Lamp for LED Du brauchst / You need: https://www.amazon.de/gp/aw/d/B0D33D4WT5?psc=1&ref=ppx_pop_mob_b_asin_image
⚠🚨⚠ LEDS ONLY ⚠🚨⚠ I'm not actually sure how safe it is... for simplicity I recommend PLA (mine didn't melt yet) for safety I recommend ASA-FR the rest is up to you as always excercise care with wiring first and foremost turn your breakers…
I wanted to control a 3D printed lamp I got from MakerWorld with my homeassistant but didn't want to spend money on an E27 smart bulb So this is inteded to fit the same hole as a regular E27 socket and has the space to fit a tiny…
No fuss lamp shade, slightly textured. Fits a standard E27 lamp socket. I have created 3 vent holes on the top: so if you have a warm lamp, the heat can escape. I would still only recommend LED lights. With the cheap IKEA SOLHETTA CLEAR…
A clean, minimalist lighting solution designed for rental apartments and easy swaps. This is a non-destructive system that fits standard 50mm bulb holders (standard for E27 pendant cords and fixtures found in EU). How it works The Clamp…
This is the model that I've designed for my rgb lamp design using an esp32 super mini and 4 rgb led strips.
Meinen Schirm habe ich mit Fuzzy Skin gedruckt, so finde ich es noch schöner. Du brauchst zu dem noch zwei Schrauben M3 Gewinde zum Klemmen. Die anderen Informationen kann an den Bildern sehen. Wenn du einen anderen Durchmesser oder…
E27/26 socket holder with mounting holes. Universal use. I created it for a ceiling fan with light. Changing the dimensions in the Z axis will not affect the clamping of the sleeve. Use a threaded sleeve with two nuts. Filament: PLA+ or…
Lampshade with 42mm hole to mount on standard (At least in closest shop =) lamp holders. Slightly squared to the bottom (Or top if looking at how it is printed) Use STEP file, STL included only for preview. Print in Vase Mode, 5 bottom…
This model was designed for purpose of holding E27 socket and litophane lamp shade, some special things are necessary.
Description: Simple but elegant lampshade, for best results - paint white on the inside, or print with white filament and paint desired color on the outside. Instructions: Use fuzzy skin 0.25 length, 0.1 thickness. Tested on Bambu Lab…
Material: PLA Druckereinstellung: Layerhöhe 0,2 mm / Infill 10 % / Support No Gutes Gelingen und über ein Like würde ich mich freuen. Good luck and I would be happy about a like.
There was a need to add light bulb to the ceiling light, o I created this project.
ORB | String Art Pendant Light E27 & E26 fast print String art meets lighting design. The ORB pendant light has a diameter of Ø249.5mm and can be printed with a regular 0.4mm nozzle. You can find a design variation of the ORB lamp here ,…
Table lamp with stackable lampshade. No screws or glue are used. The lamp needs an E27 socket. I used this one: Bioledex E27
Can be easily mounted on a pear-shaped LED bulb. Never use a printed model for tungsten bulbs or those with high surface temperatures. This would be a fire hazard! *** Lze jednoduše nasadit na LED žárovku ve tvaru hrušky. Nikdy…
Adapter for Paulmann Asthene Spot to be able to use a standard IKEA Tradfri E27 bulb
I was designing a lamp and wanted to use ceramic lamp sockets with an E27 socket, as they are the most compact ones I could find in terms of height. As there were no color options and I was not sure if I could make the hole where the…
Ich hatte mir die Abgebildete Porzellan Lampenfassung auf Amazon gekauft ( https://www.amazon.de/gp/product/B07NWVBQMR ). Da die Kontakte auf der Rückseite offen liegen und mein Installationsfall Klebend auf einer Oberfläche ist, wollte…
Just a simple lampshade inspired by IKEA TUVKORNELL that fits E27 (40mm) sockets.
I recently decided to add a grow lamp to my plant, but the socket I had was E27, which wasn’t ideal. The original E27 holder was a bit weak, so I designed a new, stronger version: Lamp_Modular_E27_Holder v2 . With a little Tinkercad…
Applique rotative et réglable en angle pour adapter sur douilles de chantier assemblage parfait pour ampoule Phillips Hue e27 et surement d'autres 4x Inserts : M3 6mm long max diam 5 4x Vis : M3x12 ou 14 long max Douilles de chantier :…
Für die Lampe brauchte ich einen Fuß, um eine e27 Glühbirne einzuschrauben. Als Lampenfassung kamen die Fassungen von Amazon zum Einsatz. Die Lampe benötigt einen größeren Ausschnitt für den Lampenfuß, diesen habe ich im Slicer mit einem…
I had a lot of Elbro E27 8921-02 provisional lamp holders laying around and wanted to give them some use. So I designed this Lamp. (maybe I'll do a version for other ones, if there is demand) Print Settings Printer Brand: Anycubic…
Print in vase/spiral mode and with 1 line of brim to help with the friction fit. Really simple model, sharing mostly to show the idea. Printed in glow in the dark PLA filament
Cube lamp featuring two options of design: Smooth outside walls (150x150x144 mm) Abstract geometric pattern outside walls (152x152x144 mm) I upload .3mf files for lamp bodies with included supports as well as .stl files. To assemble…
This model is an G9 socket adapter for base lamp create by krakenstl. https://thangs.com/designer/Kraken.STL/3d-model/La
A simple lampshade for a standard e27 socket that fits perfectly into its ring, just push it in. No support is needed, but you can add it on the ribs for better quality.
I designed it to fit the Ikea Molnart bulb in a HÅRSLINGA lamp stand, should fit other 125mm (GU125) bulbs as well. Gets hold in place by the bulb itself. Print settings I used 1.2mm Line Width (0.8mm Nozzle, with 0.4 you can go up to 0.8…
Adapter plate that can be used with the E27 bulb socket holder from Clas Ohlson: https://www.clasohlson.com/no/Pæresokkel/p/32-3842 Dimensions of plate is approx 58 x 88 mm. Diameter 40 mm and screw holes 4 mm.
FritzPeppone has a number of excellent bases for his vast array of globe lithoplanes. I really like the elegant so-called “legacy base” design that Frank Deschner created. Fritz included a threaded legacy base for E14 sockets (and I…
ORIGAMI STILT | Table Lamp E14, E26, E27 print-in-place (NOTE: this version is available at no extra-cost to those who already purchased the original Origami lamp and the Origami PIP version .) Here is a long-awaited update of the…
Designed this holder for common E27 bulb holder that can be bought in hardware stores. Usefull for projects like lamps, litophanes, etc. Note: You have to know what you are doing and in some countries have to have authorization to work…
Hanging lampshade for socket E27, for hanging in windows, for example. Diameter 15cm Height 13.5cm Fits E27 Including Lamp Ring for E27 Socket. Should be printed with 3-4 layers at the bottom and then Vase mode. Was a beautiful result…
Cover for lampsocket E27, for hanging in windows, for example. Diameter 4.5cm Height 8.5cm Fits E27 Printed with out supports. 2-3 perimeters 15% infill is good enough Was a beautiful result when it was printed in PLA Wood. The threads…
Lampring for lampsocket E27 Diameter 5.5cm Height 11mm Fits E27 Printed with out supports. 2-3 perimeters 15% infill is good enough Was a beautiful result when it was printed in PLA Wood. The threads have a good fit and have been tested…
Create Your Own Custom Light Fixture
I designed this lamp shade to fit a standard E27 bulb. The shade mounts using the regular E27 locking nut found with commonly used E27 map fixtures. The hole for mounting is 41mm big, but can be resized using the .3mf file. I've created…
Mounting Nut with a single loop thread for easy fitting on Euro style E27 lamp sockets. Best printed in ABS or PETG. 0.15mm layer height
A very easy to print lampshade. It should fit all E27 bulbs, very easy to assamble, just remove the E27 bulb and install the shade between the socket and the buulb. Print settings 3 or more walls no supports 0.2 mm layer height wall…
Give your space a sleek, modern, and industrial vibe with this minimalist cube lamp! 🖤✨ Perfect for desks, nightstands, or shelves, this design adds a unique touch to any room. 🔹 Designed for an E27 socket (55mm diameter) – The hole for…
Another base for an E27 socket (this time https://www.amazon.de/dp/B0C7N4CRBB ). 40 mm base core diameter, 45 mm lower flange diameter, 16 mm base free thread length. Cut off the original legs (didn't like them) and made new legs. Also…
You'll need to fix a snap (e.g. regular or heavy-weight bearing) to the back of the model with a small thread bolt like https://thangs.com/designer/Multiboard/3d-model/Small%20Thread%20-%20Lite%20Multipoint-1123321
This is a cord grip designed for an E27 socket, available in two sizes: Small : Suitable for cables with roughly 4–5 mm diameter. Medium : Suitable for cables with roughly 5–6 mm diameter. The cap is compatible with both sizes. I printed…
The hole for E27 socket has a diameter of 41mm and a height of 15mm. Used Material: PLA Example Formicarium:…
BLISS | Table Lamp E14, E26, E27 I wanted to make a shade entirely closed-up, joining at the sides and at the top, a bit like a pillow-shape. And I really like the way it turned out. I also added a little screw-in container to add some…
Holder for the Rapoo E2710 wireless mini keyboard. Needs 4x Multipoint, e.g. Small Thread - Multipoint
Made a slimmer version of the E27 nut so that i can fit it in my Moonlamp .
This is just a simple replacement nut for E27 lamp sockets. The lamp sockets are usually supplied with only one nut, although sometimes two are required for installation. With this file you can print another nut whenever you need it.…
same model from lithopane collecion just trimmed the custom support for easier printing!
Add a touch of modern elegance to your space with this easy-to-print Ribbed Table Lamp! This design features a stylish, minimalist aesthetic perfect for desks, nightstands, or side tables, and is designed specifically to accommodate a…
Background: Ever had an old Osram Vacublitz bulb filled with aluminum foil and thought "I want that as a bedside reading lamp!"? No? Well, I did. I got a load of old photography stuff and among them were a beautiful old TOR Flash with…
Simple shade for HUE E27 blubs. Printed in PETG spiralvise. Just put over the blub and srew in socket
E27 lampshade adapter for the old model of the Ikea Nyfors lamp that has the triangular middle section Secure the lampshade with a printed or store-bought e27 screwring / lampring / shade ring I printed for speed with 2 top&bottom layers…
This is base for table lamp Use Lamp Holder E27 Use gel glue for down cover
He hecho estas piezas para usar con las lamparas que tengais por casa Print Settings Printer: Delta Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: fervi vertigo pla vertigo Category: Sculptures
An E27 blind plug to make empty sockets safe to touch. Knurled handle for perfect grip. It might fit E26 as well, or it could be a tiny bit too big since E26 is a tiny bit smaller. I have no way to test that though. I used PETG, 0.16mm…
just clip it and den screw it into the E27 holder
Interested in selling physical prints of my designs? Want to access a growing library of exclusive 3D models? 🚀 Unlock exclusive benefits and premium access with my membership. Membership: Exclusive models + Commercial License ---…
To simplify assembly, I added a mounting place for an Oxion socket with an E27 base to the base
Custom cover reduces glare from the Philips Hue A60 E27 bulb for a softer, more comfortable light.
This durable plastic mount is designed to securely hold a standard E27 ceramic light socket in place. It provides a stable base for mounting lighting fixtures on walls, panels, or other flat surfaces, while allowing easy installation and…
Working with @Layer63_3290755 we decided to make the deathstar model of this lamp. Unfortunately due to an error in our communication we worked with different sizes of the lamp. When we finally decided to work on the 150mm Diameter…
It's separated into two parts for easier printing. I glued the two parts together with plastic glue.
🟢 E27 Lamp Base – 85mm Minimalist cylindrical base for E27 lamp sockets. Perfect for custom desk or decorative lamps. Specs: ⌀ 85mm outer diameter 📏 45 mm height 🔘 Top hole fits E27 socket 🔌 8mm side hole for cable Print-friendly design:…
