Ambient Lights Bulbs E27 - monitor vesa mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bracket to hold 2 light bulbs behind monitor for Vesa100x100
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 58
- Makes
- 0
- Views
- 566
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed a simple bracket to hold two IKEA TRÅDFRI E27 bulbs behind my monitor. It mounts using the standard VESA 100×100 pattern and has clips that fit a common type of E27 socket. I also added a newer version that holds a C7/C8–style power plug instead of using a simple cable passthrough hole.
The main reason I made this was because I wanted all my ambient lighting to be controllable with a single IKEA STYRBAR remote.
What you’ll need:
M4 screws for attaching the bracket to the VESA mount. Most monitors with 100×100 use M4×10, but depending on your setup you might need slightly longer ones, these will hold both the bracket and the monitor at the same time.
A power cable (AC cord with a plug) to power the bulbs.
PETG filament. The bulbs I use generate a bit of heat, so I printed it in PETG just to avoid any chance of warping.
2× E27 bulbs of your choice.
An E27 socket like the one shown in the photos—it’s a very common, generic type.
