Counting matching models…
These are watering “bulbs”. They can be filled with water and the spikes inserted into soil to keep it hydrated over a longer period of time. They are excellent for plants that need consistently moist soil and are quite easy to print.…
I love the Customizable Snowglobe project , and I wish there were more plates for it. I gave it as a gift last year with an assortment of plates, and wanted to extend that gift with some new plates this year. Since I couldn't find many in…
The lamp shade is held in place merely by the bulb itself. It fits on E27 “retro” LED bulbs and cheap sockets from DIY stores. Only use LED bulbs, incandecense bulbs become too hot! Printed using Prusament Galaxy Black PLA on a Prusa…
For now I have designed three lamp holders for the ikea hemma but I will add others ... they screw directly to the thread of the ikea hemma M40x2.5 and you can make one with a total cost of less than 10 euros. I recommend to print the…
This dibbler is a hand-held garden tool to assist in making shallow holes for planting seeds or bulbs. Depressions on the side mark approx. one-inch increments.
Christmas tree decoration 🎄 The Grinch, Jack Skellington and the Gingerbread Man Personal use only⚠ your support is important to me 🫶 👉 For Commercial license, check My Patreon 👈 Don't forget to give me a like 🧡 Share photos of your…
clips for your phone with a bulb socket which you can screw in a mini bulb to spread the flashlight of the phone, turning it to a night lamp. you can add copper adhesive film for nicer look.
Super-size the holiday season with decorative jumbo vintage-style Christmas light bulbs! Instructions: 0.2mm layer height for all parts Print 5 bulbs (any colors, no brim) Print 5 bases (any color, enable support at 15º threshold angle)…
Print 2 or more of these brackets depending on the length of your bulbs. A 3rd bracket can be added for middle support if the fixture is very long. Doubling up or widening the model can accommodate heaver lights. The tank shown is a 20…
UPDATE 2.5.2 Adjusted clearances around holder tabs to accommodate tighter printers - try the latest update, see what you get. UPDATE v2.5.1 Added arrow and text to show the top of the adapter. You no longer need to print in a certain way…
Lampenschirm für GU10 und MR16 LED Leuchtmittel Einfache und praktische Lampenschirme für die meisten GU10 und MR16 LED Leuchtmittel. ____________ Lampshade for GU10 and MR16 LED bulbs Simple and practical lamp shades for most GU10 and…
size : 90X90X174mm files : 4 pieces : 5 maximum size of the component : 90X90X19mm total print time : 8h raft : yes support : yes Remix : https://www.thingiverse.com/davemakesstuff/designs Category: Decor
With this 3D-Printable inner casing you can convert your Petromax / Geniol kerosene lamp from kerosene to electric. The electric inner casing replaces the normal one (where the gas mantle is attached), you can store it savely in my gas…
No more hanging bulbs! This is a support for light bulbs that are hang from the ceiling. Nothing special or a trendy thing...just a simply support to fix some annoying light bulbs's hanging wires. You need only some glue to attack it on…
Also included is a “pre-painted” project for the main base and tail to be used with the MMU. If you want to use the MMU, open “pikachu_main_body-painted and sliced” as a project. This has all my info used. Filament used for the MMU print…
A Clip to attach C9 Style Pixel Bulbs to 3/4" PVC pipe. I added holes to add a screw if needed to prevent the clip from spinning on the PVC. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .2…
I designed a simple bracket to hold two IKEA TRÅDFRI E27 bulbs behind my monitor. It mounts using the standard VESA 100×100 pattern and has clips that fit a common type of E27 socket. I also added a newer version that holds a C7/C8–style…
Lamp suitable for two Philipps Hue bulbs (E27, 1100 lm). Required are two E27 sockets like these ones . Diameter should be between 58 and 62 mm. Printing information Layer height: 0.40/0.20mm (0.6/0.4 nozzle) Infill: Base: Gyroid 10%…
The bottom plate was a little too tall for a lamp base to fit standard E26 bulb - now it fits. Print 1 Top panel, 1 Base, 10 panels to assemble
Model 1: Light Bulb - Base - Threads Single perimeter (minimal material, strong enough for screw mount) Variable layer height (maintains thread consistency) Estimated Print time: 30 mins Model 2: Light Bulb - Bulb - Threads Spiralized…
This was originally created for a plague doctor Halloween costume to hand empty lightbulbs filled with glow in the dark liquid.
Mount for the Gilbert Engineering Upright Singing Bulbs 46" Medium. Designed for 1/2" EMT. Works with many other props like IMPRESSION North Pole sign with Matrix. Category: Other
This felt silly, because these lamp-holders are so cheap, but I didn't want to purchase 8 of them, and thought others may benefit from the design work as well. It repairs a lamp holder of this style:…
Print flat on the opposed side to the "pusher handle" Print in place Light Bulb pusher Spring for optimal grip Designed in Support
These fit over standard Par 20 bulbs and give a cleaner and simpler look to your spotlights. You can choose to print them in any colour you like to better fit your decor or party. They do not block the light beam. To install, simply…
An organic sculpture depicting growth and unity. Designed to print without supports. Please "like" this file if you collect or download it. Category: Sculptures
Was created to be used with https://www.amazon.com/dp/B0CHHVSLQ1 but should work with any lamp kit that uses a 6mm or smaller diameter cord, and has a 45mm socket base. This was intended to be a reference for me to make a wooden version,…
Most LED bulbs have built-in fans and need some space for ventilation. Unfortunately, fitting H7 LED bulbs in Opel Corsa D was a tight fit and the stock back caps of the headlights didn't provide space for ventilation. I designed some new…
Gilbert Engineering Upright Singing Bulbs 46" Medium Cut in half to have one side for single pole mount.
I had an issue where the cheap aftermarket LED bulbs i was using were too long for the housing to fit in my Accord Euro and i didn't want to get new ones, it might fit other Honda models using the same W21W/7440 or W21/5W/7443 bulbs, so…
This is a ceiling light fitting for 3xGU10 bulbs bulb shader in FC file for individual custom switch box: h3xA_box_01_001.stl & h3xA_lid_01_001.stl are optional required fasteners: 7x M4x30 BHCS, 3x M3x40 FHCS, 6x M3 nut, 6x M3 washer…
I couldn't find this anywhere, so I made one with the help of Perplexing lab's Gridfinity model generator. Bulbs screw into the base so there is nothing to rattle and no need for a 'bulb separator'. I couldn't believe that this hasn't…
This layout was designed to hold 1 of the B11 style candelabra bulbs in each gridfinity square. The spacing is very similar to the small boxes that I receive when purchasing the bulbs. Now you can screw each new bulb into its own socket…
Overview I can't imagine this will be super useful to anyone, as it was custom-designed for the light fixtures on my ceiling, but wanted to upload it anyways for posterity. A while ago I bought some 800 lumen smart bulbs for my room, not…
This is a shelf for G24d-2 and G24q-2 lightbulbs. Pretty particular ones (they were FL bulbs with external ballasts) but I needed them so I did. The sockets were reverse-engineered from scratch, as nobody even made a technical drawing of…
Overview I can't imagine this will be super useful to anyone, as it was custom-designed for the light fixtures on my ceiling, but wanted to upload it anyways for posterity. A while ago I bought some 800 lumen smart bulbs for my room, not…
Designed to be printed with MK4S and MMU3, came out well at 0.20mm SPEED and Prusament PETG. After printing the first one I decided to then print then at 160% scale, making the print much stronger. Prusa Slicer project file attached too.
These are my take on the retro C7 Christmas bulbs which can be staked into the ground and use C7 light bulbs to illuminate them. The bulbs are designed to be printed upside down (see pictures) and have supports auto enforced up to 45…
This model helps mount outdoor Christmas lights along the facia or any other surface face. I created to solve the problem where store-bought clips pop off of the gutters too easily or otherwise cause obstructions with storm doors,…
Jawa cover for light bulbs, 1 big 4 small and 2 fuses Krabička JAWA na 1 velkou a 4 malé žárovky a 2pojistky
Designed as a "lampshade" but is more decorative than functional. Printed 4 with different colours and looks great. Fits well with my other desing of diamond nobs for IKEA furniture.…
Can fit one H7 bulb, one W21/5W or W21W bulb and 2 W5W bulbs. Due to the differences in bulb dimensions from different manufacturers bulb fit can range from tight to loose so always keep the container in correct orientation when opening.…
This is a simple mesh style lampshade designed for use with 110-240v light fittings using LED bulbs. Check that the bulb you use does not get hot enough to damage the filament you use. The fitting holder is printed separately to allow for…
A simple design for a Christmas Tree with lights that can be lit from the hollow cavity of the tree using a light source. I printed the lights with 0 infill.
We are a group of artists and designers and we all are passionate bike riders. To become more visible we decided to create our own led jackets. This cap works as a cover for the LEDs we are currently using. Probably only of concern for…
My old curved glass shade didn't fit with my hue bulbs so I printed this one as a replacement. Uses the entire Mk4 build volume. To get the hexagon pattern I set the infill to honeycomb, with zero top layers and two bottom layers. Printed…
*** Recreate or distribute my work at your own risk, by downloading these files you agree to ‘Releases and Hold Harmless’ myself and my estate from any and all liabilities and or damages you or your affiliates incur*** I purchased several…
I printed the base-top-lid with supports, but I'm not sure it's required - YMMV. The shade is printed in vase mode with the instructions from the original modal.
