Spherical Lamp for ambient light
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spherical Lamp to give off ambient light (placed in a corner)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 42
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- GNU General Public License v2.0
This is a bit of a tricky print, I wasn't able to get a clean finish on the top of the sphere using my MK4S, so I decided to just have a hole in it since I was putting it in the corner anyways. I've included files to print this in vase and regular mode, so maybe try out which one works better for you. I've also included the .step files if you have an idea of how to make this easier to print feel free to remix it.
I've glued a bunch of LEDs on the walls of the sphere and put a ESP32 in there to control ambient lighting in my living room through homeassistant. There's a hole in the bottom and a channel to run a USB-C with the connector chopped off through it. The channel is not deep enough for the wire to sit flush as I've also added rubber feet to the bottom