Sampu Cosmetic Kit for HC Diana
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Additions to the Diana Nerf blaster to look like the Armored Core VI MA-E-211 SAMPU Pistol.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 25
- Wydruki
- 1
- Wyświetlenia
- 636
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
*** WORK IN PROGRESS ***
6/16/25
Testing of these parts is still ongoing.
6/17/25
Added sliced Front Shell and Hook pieces for smaller print beds.
// ----------------------------------------------- //
Notes:
- Battery is accessed by rotating the barrel piece and removing the slide door.
- Battery space is roughly 3.5cm tall x 11.5 cm long x 2.8cm wide (narrowest point between sliding door dovetail)
- extension XT30 wire is required, for original battery cable to reach the new battery compartment.
// ----------------------------------------------- //
Assembly:
1) Attach Muzzle Dovetail to diana front with x4 2M screws.
2) Attach Pic Rail Brace to diana (x2 2M screws).
3) Join two sides of Front Shells together, then slide onto the Muzzle Dovetail and align with Pic Rail Brace.
4) Secure Front Shells to Pic Brace with x2 3M 10mm screws.
5) Join L & R Hook parts together, and attach Hook Base.
6) Attach the Hook Base should attach to the diana grip bottom, where the two 2M heat insert screws are.
7) Join the left hook tip to the bottom of the Front Shell using x2 3M 40mm screws.
8) Insert Slide Door and Barrel Piece into Front Shell.
// ----------------------------------------------- //
Parts List:
- 3M 40mm x2
- 3M 20mm x13
- 3M 15mm x1
- 3M 10mm x2
- 3M Hex Nuts x12 (optional+2 for Pic Rail-Front Shell attachment)
- 2M 4mm x8
// ----------------------------------------------- //
Reference Picture: