Liczymy pasujące modele…
Chachapoyan Fertility Idol aka Golden Idol from the Indian Jones movie Raiders of the Lost Ark (1981). Using Fusion 360 I was able to reduce the mesh by 75% without losing too much quality. PolyLite Silk Gold: https://amzn.to/46fmrag 1:1…
In early spring of 2023, I built a small Indy / Jock Lindsey's Hangar Bar themed bar in our basement storage area /unfinished game room. As of mid-April 2023 I started to ask around on the internet looking for a Dial of Destiny /…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Indiana Jones Model, sculpted in zbrush. May need to be scaled. Hat is a separate piece. Print instructions Licence: Creative Commons - Attribution - Non-Commercial Category: Sculptures
if you wanna make it cooler, download this diorama :) https://www.prusaprinters.org/prints/107523-the-temple-mini-indy-mindy-and-micro-joel-not-incl
Huge thank you to Printables user soozafone for creating my new obsession, Lucky 13 . Supports will be needed for the Hat and Head You will need the Lucky 13 armature and skin found here…
Structure et crosse pour un pistolet Artemis CP2 / Diana chaser
This is a stock for an Artemis CP2 airgun. Use M5 screws, and 3d printer threaded rods T8 / 2 for the big ones. T8/2 are 5 cm , except the bottom one 10 cm For the wheels, there's 2 types (you choose) : you can print the threads, or…
"It belongs in a museum!" - Indy I'm happy to share the Cross of Coronado from Indiana Jones and the Last Crusade . This package comes with everything but the Crucifix Jesus Figure; I got mine from 123D, just search for Crucifix christ .…
The original design was to big for my rifle. So I Designed a new one fitting on a M10x1 barrel (5.5mm/0.22" pallets). Because (when printed in PLA with 0.15 layer height) it's a tight fit. If you have the right tab, first use it for the…
This is a printable replacement magazine built mainly for the Diana, but it also has notches for the Worker Nightingale, and the Firerat (untested, also an uncommon blaster). It gravity drops from the Diana, but not the Nightingale. These…
Hello! :3 I found the lack of freely available magazine extensions for the HC Diana blaster quite shocking. There are some, but I could only find models that gave +1 or +2 darts, that kind of ball park. I know Nightingales work if you…
This is a set of blocks that can be used to recreate the Indiana Jones figure at 500% scale. This figure was included in 15 different sets from 2008 to 2009 such as Indiana Jones and the Lost Tomb , Indiana Jones Motorcycle Chase , and…
Here is an Indiana Jones Keyring i made. No supports needed. Enjoy !
UPDATE 2024/11/23: Added battery door. Embedded PCAR that replaces the wide bore original aluminum barrel. This has increased accuracy at the price of velocity. I originally designed this to get the Diana on 4S to be under 130 FPS so the…
The Holy Grail from The Last Crusade, based on photos of the props from auctions and still frames. Should be sized and profiled pretty similarly to the “real” thing. There were multiple Holy Grail props used in the movie, so there will…
This project contains two adapters to mount a 1/2" UNF thread or M10 thread silencer / moderator to your air gun. One can be used to mount a 1/2" UNF silencer to the Diana Bandit PCP pistol and the other to mount the Diana Bandit silencer…
Indiana Jones. ah… I will leave it up. But after stepping back and looking at it… Not digging it. meh.. garbage.
Specifically designed for the XM1 but should fit the PR900W and the Stormrider as they are essentially the same rifle. The problem that I was having is one of a wandering zero after transporting the rifle in a soft case. You can, of…
This is the Rush. Except, i made it utilize Diana magazines. It'll fit Nightingale mags too, but that depends on how well you made the cutout for the hole to catch. Here's additional stuff i'm linking off Chance's remix of his Rush,…
This is a very old design. Please look at my other moderators for a current design This moderator is for air gun use only! Do not attempt to mount it to any other type of gun! Follow you local laws regarding moderators! This moderator has…
These are upgrade parts to turn your original magazine into a 20 round one. Source files (FreeCAD 1.0) are included. Parts needed: M3x12mm DIN912 socket head screw Spring from Diana Chaser magazine… …or wind your own spring: 10.5mm outer…
Indianapolis Colts 1st layer White 2nd Blue
Snowpeak SP500 / Diana P-Five shoulder stock inspired from crosman 2250 ratcatcher butt stock. Model cut to fit the Prusa MINI I Printed it using PLA with 20% honeycomb infill I used CA glue to join part exept “Left front” wich is bolted…
Atremis or Diana Diana is a goddess in Roman and Hellenistic religion, primarily considered a patroness of the countryside and nature, hunters, wildlife, childbirth, crossroads, the night, and the Moon 1 . She is equated with the Greek…
For how to use this jig, please watch the video here: Print in PLA or whatever plastic you don't mind being basically thrown away (this is a jig that will get cut) If you are having a hard time getting it to feed properly, shave a small…
30/5/2024: Added version with lanyard hole 18/1/2024: Increased the width slightly for better first layer adhesion, fixed screw holes that were misaligned. Requires 2 x M2 screws. 4-6mm length
Color sequence should be blue then white.
🔵 Indiana Jones - svatý grál 🔵 ➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖ I created Holy Grail from the movie "Indiana Jones and the Last Crusade". The other models from this movie are on its way. Stay tuned! Follow me on YouTube for more info about what you can…
The Kenner Indiana Jones toys were one of my favorites as a kid. I always loved the Well of Souls map room play set as the miniature map was so cool. Here is a recreation so you can print your own for setting up your own scenes. I modeled…
Indiana, USA (IN) Topographic Relief Map with Rivers and Coastal Waters Indiana, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of Plastic…
Una de las piedras de Sankara de la pelicula Indiana Jones y el templo de la perdicion. El modelo no esta escalado, pero es super sencillo. se escala a 135 mm de altura y luego, deseleccionando la casilla "escala uniforme" se escala el X…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Quick remix I made of this model, just to add a base, from thingiverse.
The planter has a modern, geometric design with a faceted, low-poly surface that creates a unique, angular texture. Its shape is slightly rounded with a wide opening at the top, making it practical for planting flowers or small plants.…
R.M.S. Titanic Statue from 1st Class Lounge | Diana of Versailles
Hello, to download Clutch To The Meat Grinder Zelmer Diana 1500W, it is possible that it matches other models of the Zelmer part is my production from the beginning of the planning stage to the final stage, If you want you can always…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Horizontal mags are cool, they slide smoother, get stuck less, and sound quieter when loading/unloading. A big advantage of this is the print direction of the feed lips, which makes them much much more difficult to break when printed…
Materials List - x1 3M x 12mm screw - x1 10mm compression spring (length can be shorter if you have a stronger/stiffer spring) - 8-9mm of Wire Hanger or other metal rod < 3mm in diameter - x1 2M x 3mm screw (should be included with the HC…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I do comprehensive 3D scanning and you can see some of my results here. The models are partially edited with AI due to small or missing details. If you are interested in my work and have a specific interest, you can write to me and my…
Indiana Jones idol keychain.
printed holster for the diana, you will need 2 m3x6mm screws to attach the retention clip. The holster should be printed out of pla or another equally stiff material with a large number of walls and a brim as the surface touching the bed…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
To reach the 25 models, one last test on Sunday, Darth Vader and Alice , we added Indiana Jones (I must admit that I see the image and my head can't help but hum the Indy theme ;) ) I include the OrcaSlicer file with the filament changes.…
Muzzle ring for HC Diana nerf blaster. Uses 4x M2x4mm countersink machine screws, as it was the only M2 I had on hand. 130 motor screws, which are M2x5mm should fit as well. So the choice isn't that bad, although it may not be as…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
magazin besteht aus drei teilen rückwand kann mit sekunden kleber geklebt werden
2/12/2023: Added an alternative muzzle, 20mm longer and slightly fatter Requires 4 x M2 screws Shorter muzzle can be printed either vertically or horizontally, will still need some supports either way. The longer muzzle should be printed…
Magazine for Diana pellet guns. Should fit the models: Trailscout, Stormrider, Bandit and Chaser. I tested it on a Diana Trailscout. The magazine fits seven 4.5mm rounds and uses a 6x18mm spring for tension. On the bottom is a slot to fit…
you will need x2 m2 screws to fit it to the blaster.
Indiana Jones logo in 3D. 5mm high.
Diana Stormrider magazine replacement part. With this type of magazine it is very hard to see if you shot the last pellet. This way I ruined my magazine drum pretty quickly. With the bright orange drum it is much easier to see. It reloads…
This is a simple Indiana University keychain, enjoy! The original model I made this from was on Thingiverse, here is the link to their model: https://www.thingiverse.com/thing:4695511 Print Settings: eSun Red PLA+ 210/65C 0.20 mm layer…
I decided to try my hand at modeling the Holy Grail from Indiana Jones and the Last Crusade and here it is printed in CC3D Silk Gold PLA. There are two models, one prints normally, and the second should be printed in vase mode. Both came…
Dieses Modell ist im Massstab 1:24 und ist ideal für Resin Druck
Pack de llaveros personalizados con los nombres Dany, Mary, Dayana, Diana, Jesy y Gaby, modelos originales.
This is a simple coaster for fans or people who just generally support IU. People with Prusa MMU / Bambu Lab AMS can just paint the model, or use a filament change. If you are using a filament change, change at layer 8. For single…
This is an early 3D model of Diana from the game Pragmata . Since official assets are non-existent, I decided to create my own version. Key Details: Status: Work in Progress (WIP). This is a fresh release, and I am still refining the…
Croc jibbit of idol from Indiana Jones.
Here is the awesome looking Indianapolis Colts Oversized Necklace, Pendant! Hope you guys enjoy! Fits with the standard oversized chain you can find here on Makers World. Want a Commercial License to sell my prints? Join my Patreon or…
I worked on a grip type Walther GSP for my PP800. I recommend some sculpting application like SculptGL to modify the Standard grip and leave it in the shape of the user's hand. Best sence with 50 % Infill
To install, Unscrew the mag base. Then screw the new one in (super simple). The extenders are somewhat untested, let me know if there are any issues.
Another plane I made, but this was purely for fun! How I Designed This Modeled using AC3D Category: Vehicles
A nice desktop item for the Indiana Hoosier fan in your life! Go Hoosiers! I've included an option if you want to exclude the hollow IU in the bottom corner.
Info: STL / DXF files, instructions and drawings will follow when the first prototype with AR15 grip and mount for the yet to be developed folding stock with magnetic lock has reached a development stage for you to test. The STL files…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
The battleship bb 1 uss Indiana I saw printsnails simple large battleship and wanted to make my own so i saw the model ship (uss Indiana) and made a simple 3d model
Indiana Jones Chachapoyan Gold Fertility Idol Buddha
Front picatinny rail for HT Diana blaster. Requires 2 - M3x6mm button screws (what I had around). You can use longer screws, but they will extend into the battery compartment. Thanks to harddrv1 for posting the original model from Defense…
I do comprehensive 3D scanning and you can see some of my results here. The models are partially edited with AI due to small or missing details. If you are interested in my work and have a specific interest, you can write to me and my…
UPDATES: 23/01/2025 Fixed mounting holes for PCARs 17/01/2025 Published Extended Button Release 16/01/2025 Published PCAR Dart Gates This will be a repository of all the modified parts I will be using for my HC Diana The first…
may have to scale it to get it to fit right, should not need glue but you can use some. press into the hole in the front of the pusher and your misfeeding problems should go away.
Lightweight short stock for my PCP gun. Goal: Lighter and faster movement for pestcontrol ( rats on the farm ) This saves about 1kg ( 2 pounds? ). Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution:…
Remixed for easier hold for diana mags. Added standard splitter if you want a dual holder with stock diana mags and no extender, along with a thiccc one for people with mag extenders like myself **Added a copy of Anthony's build guide to…
Replacement magazine cap for the HC Diana nerf blaster. Suggest light filing of the screw hole prior to installation, although it is not necessary. Just makes screwing it on easier. In the photo, the part has a wavy pattern because I…
I wanted an action figure stand for my Hasbro Indiana Jones figure so I made a coaster and action figure stand. There are 4 versions of the stand with the peg in 4 different locations depending on how you want to pose Indy or any other…
Adapter to convert the regular Abyss Diana earpads (V2, TC, MR, DZ) to the bass ported ones. Just place them between the headphone and the original earpads and enjoy the extra bass. The magnets are still strong enough to hold the earpads…
This model uses four M2x5mm countersunk machine screws, commonly known as flywheel cage/motor screws in the hobby. I designed this because I wanted a muzzle piece for my Diana that had a fairly visible footprint, without adding much bulk…
A new 3D figurine generated by AI, a Chibi Indiana Jones. I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the camera…
Originally published here: Horned Idol from Indiana Jones and The Fate of Atlantis by tato_713 - Thingiverse Did you find a lock to match my key? . The double meaning phrase of Klaus Kerner at the beginning of the game. This is the model…
This is the Venice Canal Chase set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's name,…
Indy Indiana Jones Film / Cinema room sign, Colours can be altered to whatever you prefer through your AMS (Bambu) or through you current printers configuration. Large Measurements approx.: 22cm x 7.5cm x 2cm Medium Measurements approx.:…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
The tensioning shim snaps on/off and is retained when the mag holder is empty. Without modification, mags can be held in place if sayas are assembled tightly enough. Advise cutting an additional groove in smaller mags to match the…
Indianapolis International Speedway, USA, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
A simple screw knob for adjusting the elevation of the rear sight. It fits many airguns but it's made to fit older ones like the Diana Mod.5 air pistol. It's heavily based on Tjugt design that he made and the dimensions are all his. I…
All credits back to the original Indy Cross of Coronado and the Cross of Coronado and Remix models (linked in this listing). These tiny additions let you print the pearl in-inlay, pearls and surrounds for the main cross 10mm pearl…
A remix of the ntalekt's "Indiana Jones - Chachapoyan Fertility Idol" model that can now double as a piggy bank.
(Experimental) Run KptnAutismus's drum mag on your Diana. Replaces the “Neck” in the original files. Print 1x diana dummy lead and 5x diana dummies secondary for a comfortable feed. Fits any compatible superdrum, no hardware changes.…
Diana is 145 mm long x 50 mm high x 20 mm deep. It is made SketchUp 2015 with the Arial bold font. I print it in yellow PLA, 0.3mm/layer and 7% fill.
For an easier time printing, sink the model down in your slicer so that the head isn't floating.
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
My attempt at making this simple 50 round drum compatible with the HC Diana. because of the longer “neck” on it, it's actually closer to 56 rounds now I think, but oh well. This has as of writing not been tested yet. My theory is that the…
Kirby as Indiana Jones keychain I think it's pretty cool. PLEASE LIKE (still tryna get a 3d printer)
