Kenner Indiana Jones Map Room
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Kenner Indiana Jones toys were one of my favorites as a kid.
- Ocena
- 0 / 5
- Polubienia
- 76
- Pobrania
- 334
- Wydruki
- 0
- Wyświetlenia
- 1785
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution
The Kenner Indiana Jones toys were one of my favorites as a kid. I always loved the Well of Souls map room play set as the miniature map was so cool.
Here is a recreation so you can print your own for setting up your own scenes. I modeled this off the original map piece from the play set. The first picture shows the original on the left and 3D print on the right.
The original also has some faux hieroglyphics on the base near the holes so I am going to try and add those as well.
Printed this at .10 resolution with 15% infill using PLA. Hope everyone enjoys this!
Happy Printing!!
Print instructions
Category: Toys & Games Summary
The Kenner Indiana Jones toys were one of my favorites as a kid. I always loved the Well of Souls map room play set as the miniature map was so cool.
Here is a recreation so you can print your own for setting up your own scenes. I modeled this off the original map piece from the play set. The first picture shows the original on the left and 3D print on the right.
The original also has some faux hieroglyphics on the base near the holes so I am going to try and add those as well.
Printed this at .10 resolution with 15% infill using PLA. Hope everyone enjoys this!
Happy Printing!!
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
</div>Rafts:No
Supports:
No
</div>Resolution:.10
Infill:
15%
</div>