Liczymy pasujące modele…
For everyone who has a lost vintage Kenner Star Wars action figure lightsaber. I realized that a couple of the light sabers in my vintage figures had broken tips on the end so figured why not design a replacement for a 3D printer! I tried…
The Kenner Indiana Jones toys were one of my favorites as a kid. I always loved the Well of Souls map room play set as the miniature map was so cool. Here is a recreation so you can print your own for setting up your own scenes. I modeled…
I recently bought and restored a Kenner Imperial Shuttle from 1984. The wing mechanism was broken, I looked online for free replacement parts, but I couldn't find any. So I made my own in Fusion 360, enjoy! Print instructions: For a full…
Once again for anyone who has lost their original Kenner Millennium Falcon Training Droid Arm here is a replacement. This is modeled off an original training droid arm part from a 1978 Kenner Falcon. I printed this in 0.10 resolution and…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/bAtgLxkPDlw Category: 3D Printing
For everyone who has lost their original Kenner Millennium Falcon HoloChess table here is a replacement. This is modeled off an original HoloChess table part from a 1978 Kenner Falcon. I printed this in 0.15 resolution and 15% infill. The…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/e1V2Qezh6rN Category: 3D Printing
An open source 3d model of the 1995 Kenner Crossbow Nerf blaster, recreated from scratch. Built upon prior work by Captain Slug and Lucian on NerfHaven. 3D Model Video Overview: https://www.youtube.com/watch?v=gofHQ6IpOhw This is my…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/4GTceEOOOpH Print Settings Printer: Cetus 3D Mk2 Rafts: Yes Supports: Yes Resolution: 0.05mm Infill: 99% Filament: Rigid Ink PLA Grey Category: Vehicles
3rd leg for your Kenner Vintage R2D2 Star Wars Figure. https://youtube.com/shorts/9aDOvt-IGjQ Retro Realistic Hobbies YouTube Channel https://youtube.com/@retrorealistichobbies
Replacement Kenner ROTJ Speeder Bike Handles As featured on Toy Polloi YouTube Channel! http://youtube.com/user/toypolloi/ This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/0ELDn0hmhOT Print Settings…
UPDATE: Thickened and reinforced grip on 1:12 version Update: revised scale Howdy, still learning to make 3D models here, I have today for your pleasure my attempt to recreate that chunky large blaster rifle that came with the Kenner…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/kmP4DXM1LJ7 Category: 3D Printing
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/lT5ycadWRmA Category: 3D Printing
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/1WM951nBSqJ Category: Vehicles
Kenner ROTJ Speeder Bike Exhaust Flaps (Ver A - dot pattern on the back) - Replacement Flaps for the Kenner Speeder Bikes. Print out and plastic weld the 2 hooks in the spaces provided on the bottom of each flap. The little one connects…
3D scan of the vintage Star Wars figure Nikto from 1983. Scanned using a OpenScan Midi. I have not done any clean up other than a rough scale. Thanks!
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/7vM8LBqHMnv Category: 3D Printing
I designed these models as when I bought the playset they were missing. They work with the playset and and Star Wars Kenner action Figures. I would recommend printing at around a .16 layer height so the pieces snap together nicely. “Yoda…
Showdown in Little Tokyo - Chris Kenner & Johnny Murata - 1991 3D printable model.
UPDATE: Thickened and reinforced grip on 1:12 version UPDATE: Revised to improve scale as accidentally loaded them too big Howdy, still learning to make 3D models here, I have today for your pleasure my attempt to recreate that chunky…
Kenner ROTJ Speeder Bike Exhaust Flaps (Ver B - easier to print solid line pattern on the back) - Replacement Flaps for the Kenner Speeder Bikes. Print out and plastic weld the 2 hooks in the spaces provided on the bottom of each flap.…
Bottom mounted Cannon for Kenner Speeder Bike ROTJ. I used a microscrew that had a 1.4mm thickness and a screwhead of 2mm for the fixing stud for conencting to the main body (2mm x 1.4mm x 3.8mm). I bought "1000 tiny micro glasses screw…
This lightbox is made for all M.A.S.K. fans and childs of the fantastic 1980s where toys were really cool and awesome! All you need is the front and rear part as well as about 15cm of LED stripe and a little power supply that meets the…
Roger Roger!!!
On the high-end Kennerton Magister HI FI headphones, I recreated the Left and Right elements that connect the headband to the two cups.
Print with supports. Pls like and post makes. Good luck!!! Update october 3rd 2026: Added arms v2
I picked up an old Kenner Girder toy from a rummage sale that was missing the elevator pieces, so I recreated them from scratch. Includes: Elevator car Top rope guide Spool and crank knob The elevator, spool, and knob do not require…
This may come in handy when restoring a broken motor in your vintage Kenner Star Wars X-Wing Fighter. Printing settings I recommend a layer height of 0.15 mm, but 0.20 mm should work as well. Print with supports. Assembly Fits the…
Halo 3 Recon with Kenner style articulation.
Modified to be interlocking and attachable to 1980 Kenner Snowspeeder. Also comes with additional accessoires (Blaster, and Harppoons) that can be hidden under a fake bottom. Harppons and blaster cut in half (I used glue to put them…
Print wwith supports. Pls like and post makes. Good luck!!! https://www.thingiverse.com/thing:7282439 link to original model
Not my model i just rescaled it this is the original model pls like and post your makes!!!
This is kinda a big print but it should be scaled to 3.75 figure also known as 1/18 scale. Print with supports. Pls like and post makes Good luck!!!
Print with supports. Pls like and post makes. Good luck!!!
Print with supports. Pls like and post makes. Good luck!!! nvm ima just publish the shoulder pieces too.
Print with supports. Pls like and post makes. Good luck!!! Use a 1.75mm filament piece to melt and push both end for the knee joints and elbow joints. Look at pics to see example.
Print with supports. Pls like and post makes. Good luck!!!
Print with supports. Pls like and post makes. Good luck!!!
Print with supports. Pls like and post makes. Good luck!!! Wort Wort!!! October 28th: added Elite v2
Print with supports. Pls like and post makes. Good luck!!!
Print with supports. Pls like and post makes. Good luck!!! I did not use AI but the model for the body I remixed was made by AI. If you wish to customize this figure check it out on Tinkercad…
Replacement catch for the Nerf Crossbow. Altered from the original stock part. Certain aspects of the design have been simplified for easier 3D printing. You may need to source a wider catch spring (the catch post is around 5.1mm…
Print with supports. Pls like and post makes. Good luck!!! I may not print this. So if you want if you post a make I can use it as the photo
Print with supports. Pls like and post makes. Good luck!!! 2000 Download special!!!!! thank yall for the support!!!
Print in tpu for best results. my account on tinkercad https://www.tinkercad.com/users/fBDvODmbvgV
Print with supports. Pls like and post makes. Good luck!!! Sorry I couldent make his legs articulate it would be pretty hard to do it.
Print with supports. Pls like and post makes. Good luck!!!
Print with supports. Pls like and post makes. Good luck!!!
Print with supports. Pls like and post makes. Good luck!!!
Print with supports. Pls like and post makes. Good luck!!!
Print with supports. Pls like and post makes. Good luck!!!
Print with supports. Pls like and post makes. Good luck!!! Got the base model of makerworld https://makerworld.com/en/models/3202931-project-horizon-space-explorer#profileId-3624753
Print with supports. Pls like and post makes. Good luck!!!
Print with supports. Pls like and post makes. Good luck!!!
Print with supports. Pls like and post makes. Good luck!!! This is were to get the lightsaber
Replacement part for the Kenner Star wars INT-4 1982 Canon model.
Print with supports. Pls like and post makes. Good luck!!!
Print with supports. Pls like and post makes. Good luck!!! I did not use AI the creater of the base model used AI.
Print with supports. Pls like and post makes. Good luck!!!
Print with supports. Pls like and post makes. Good luck!!!
Print with supports. Pls like and post makes. Good luck!!! I have not printed this yet but when I do I will update pictures.
Print with supports. Pls like and post makes. Good luck!!!
Print with supports. Pls like and post makes. Good luck!!!
Print with supports. Pls like and post makes. Good luck!!!
Print with suppots. Pls like and post makes. Good luck!!!
Print with supports. Pls like and post makes. Good luck!!! Heres the base model Stupid Tank Guy - Free 3D Print Model - MakerWorld
Replacement part for the Kenner Star wars Cap-2 1982 Canon model
Print with supports. Pls like and post makes. Good luck!!!
Print with supports. Pls like and post makes. Good luck!!! I will take a better pic soon.
Print with supports. Pls like and post makes. Good luck!!! I did not use AI the creater of the base model used AI.
Print with supports. Pls like and post makes. Good luck!!!
Print with supports. Pls like and post makes. Good luck!!!
Replacement part for the Kenner Star wars Rebel transport 1982 Escape door model.
Print with supports. Pls like and post makes. Good luck!!! Im pretty sure this is the scuba outfit from ark survival evolved.
Eine Klemme zum Personalisieren deiner IKEA 365+ Gläser. Wer kennt es nicht; auf dem Tisch stehen 5 benutzte Gläser und es ist nicht mehr nachvollziehbar welches Glas zu wem gehört. Auftritt: der Trinkglaserkenner!!1 Einfach ein paar…
One of my Star Wars INT-4 mini rigs from 1981 was missing the front gun, so I attempted to make one in Tinkercad. Measurements are taken from an original. If you split it in two parts it can be printed without supports like I did here. A…
Print this with translucent resin. I'll leave perfecting that to you! Good luck! Category: Toy & Game Accessories
3d Print in any filament but to hold items I would print the arms in tpu. my account on tinkercad https://www.tinkercad.com/users/fBDvODmbvgV Update August 14 added articulated head.
A set of replacement crates for the vintage Kenner Star Wars Dagobah playset. These always seem to be missing when you get one of these. Here are the two crates modeled and ready to print. They include a hole in the bottom so that they…
3D scan of the vintage Star Wars figure Ponda Baba, also known as Walrusman, from 1977. Scanned using a OpenScan Midi. I have not done any clean up other than a rough scale.
