Kenner Star Wars Imperial Shuttle Wing Mechanism Fix/Repair
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement parts for the wing mechanism of an Kenner Imperial Shuttle
- Ocena
- 5 / 5
- Polubienia
- 63
- Pobrania
- 286
- Wydruki
- 0
- Wyświetlenia
- 3218
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I recently bought and restored a Kenner Imperial Shuttle from 1984.
The wing mechanism was broken, I looked online for free replacement parts, but I couldn't find any.
So I made my own in Fusion 360, enjoy!
Print instructions:
- For a full replacement of all parts, you need to print: two gears and one of each wing peg.
- Print all parts at 0.2 mm layer height for a perfect fit!
- The gear has to be printed with supports.
If your wing pegs are not broken, you can still install the peg parts for better structural support.
Installing the gears can be tricky, put the ship on a flat surface and put down both of the wings, to make it easier. Do not use force! Rotate the metal rod slowly, the gear teeth should snap in at some point.
Printed in Fossil Gray PLA.