Kenner Millennium Falcon Training Droid Arm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Once again for anyone who has lost their original Kenner Millennium Falcon Training Droid Arm here is a replacement.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 235
- Wydruki
- 0
- Wyświetlenia
- 743
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution
Once again for anyone who has lost their original Kenner Millennium Falcon Training Droid Arm here is a replacement. This is modeled off an original training droid arm part from a 1978 Kenner Falcon.
I printed this in 0.10 resolution and no infill but will look great with higher resolutions as there isn't a ton of detail on this. The original part is on the top in the pics.
The model is very thin and has detail on each side so you will have to cut it and glue the two halves together for best results. Cut sweet spot appears to be 2.4 for me but play with it until satisfactory with your slicer.
Hope everyone enjoys this and have fun!
Print instructions
Category: Toys & Games Summary
Once again for anyone who has lost their original Kenner Millennium Falcon Training Droid Arm here is a replacement. This is modeled off an original training droid arm part from a 1978 Kenner Falcon.
I printed this in 0.10 resolution and no infill but will look great with higher resolutions as there isn't a ton of detail on this. The original part is on the top in the pics.
The model is very thin and has detail on each side so you will have to cut it and glue the two halves together for best results. Cut sweet spot appears to be 2.4 for me but play with it until satisfactory with your slicer.
Hope everyone enjoys this and have fun!
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Mk2
</div>Rafts:No
Supports:
No
</div>Resolution:0.10