Kenner Star Wars Action Figure Lightsaber
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For everyone who has a lost vintage Kenner Star Wars action figure lightsaber.
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 415
- Wydruki
- 0
- Wyświetlenia
- 2573
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution
For everyone who has a lost vintage Kenner Star Wars action figure lightsaber. I realized that a couple of the light sabers in my vintage figures had broken tips on the end so figured why not design a replacement for a 3D printer!
I tried to print these in one piece but nothing I could do would come out nice and smooth so I had to cut it into two halves. Print both then glue with your favorite gluing method. I have found that some of the vintage figures have a small lip on the inside of the hand when you go to insert these so just be aware.
The pic with the two out of the figure shows the original on the right and printed piece on the left. I printed these at 0.10 resolution but you should be able to get away with others.
Have fun!
Print instructions
Category: Toys & Games Summary
For everyone who has a lost vintage Kenner Star Wars action figure lightsaber. I realized that a couple of the light sabers in my vintage figures had broken tips on the end so figured why not design a replacement for a 3D printer!
I tried to print these in one piece but nothing I could do would come out nice and smooth so I had to cut it into two halves. Print both then glue with your favorite gluing method. I have found that some of the vintage figures have a small lip on the inside of the hand when you go to insert these so just be aware.
The pic with the two out of the figure shows the original on the right and printed piece on the left. I printed these at 0.10 resolution but you should be able to get away with others.
Have fun!
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Mk2
</div>Rafts:No
Supports:
No
</div>Resolution:0.10
Infill:
10%
</div>