1 / 1
Piaggio Liberty 150 Tools
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just some tools I created to help me change the oil in my scooter.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 139
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I find these helpful when it is time to change my scooters oil.
- Oil Filter Wrench - I printed it at 0.2 mm layer height, turned off infill, and set enough shells to make it solid.
- 24 mm Box End Wrench - the oil-screen plug is sealed by an o-ring so it should not be over tightened. This makes it possible to use a PET wrench. I used 0.2 mm layer height, 26% gyroid infill, and 6 shells.
- Oil Funnel - the oil fill hole is in a awkward place, so a custom funnel is very handy. This does not need to be overly strong. I printed it at 0.2 layer high with 15% infill and 3 shells.
These are a work in progress. They work, but I am improving them as I use them.