1 / 1
Piaggio Liberty 150 Tools
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just some tools I created to help me change the oil in my scooter.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 29
- Makes
- 0
- Views
- 139
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I find these helpful when it is time to change my scooters oil.
- Oil Filter Wrench - I printed it at 0.2 mm layer height, turned off infill, and set enough shells to make it solid.
- 24 mm Box End Wrench - the oil-screen plug is sealed by an o-ring so it should not be over tightened. This makes it possible to use a PET wrench. I used 0.2 mm layer height, 26% gyroid infill, and 6 shells.
- Oil Funnel - the oil fill hole is in a awkward place, so a custom funnel is very handy. This does not need to be overly strong. I printed it at 0.2 layer high with 15% infill and 3 shells.
These are a work in progress. They work, but I am improving them as I use them.