Diaqua WC Seat Nut Driver – M6 Socket Tool with Ratchet Adapter (Deep Socket / Pass-Through)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A durable, elongated M6 nut driver designed for use with Diaqua toilet seat assemblies. This tool features a 10 mm hex
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
A durable, elongated M6 nut driver designed for use with Diaqua toilet seat assemblies.
This tool features a 10 mm hex socket (to fit standard M6 nuts) at the top, and a female ¼-inch square hole at the bottom – allowing it to be operated with a standard ¼" ratchet.
The internal shaft is fully hollow (⌀ 6.2 mm), so long screws can pass through during tightening – perfect for installations where nuts are recessed or bolts are extra long.
This tool was created specifically for Diaqua WC seats, where original tools often break or go missing.
🧾 Print Settings
Material: ASA (moisture and heat resistant – perfect for bathrooms)
Infill: 15%
Walls/Perimeters: 3
Layer Height: 0.2 mm
Supports: Not needed
Brim: Recommended when printing with ASA
🔧 Use Case
Fits M6 nuts (10 mm hex)
Designed for Diaqua toilet seats
Bottom side accepts ¼" ratchet drive (square male connector)
Fully hollow tool shaft – allows screws to pass through